Table of Contents
Advertisement
Operator Function
▶ Changing the TEST COUNT
The TEST COUNT means the number of test.
If you want to change the test count, press BLANK key or SET button then input the
test count and press ENTER key. To delete the test count while inputting, press
CLEAR key. To cancel the test while testing, press CANCEL key.
<Note!>
TEST COUNT affects when testing RECEIPT PRINTER, CASH DISPENSER, and
MODEM.
CASE
1. If you input test count '0', the test count will be "UNLIMIT"
2. If you input test count 10, the test will perform 10 times.
3. If you cancel a test and then perform same test, the test count will be continue.
e.g. If you cancel a test when the tested count is 3, and then perform same test, the
tested count starts at 3.
4. If you cancel a test and then perform another test, the test count will be initialized.
e.g. If you cancel a test when the tested count is 3, and then perform another test,
the tested count starts at 0.
© Hyosung TNS Inc. All Rights Reserved.
Chapter 3. SUPERVISOR MENU
BLANK Key
3-21
Advertisement
Table of Contents
