Table of Contents
Advertisement
Operator Function
TERMINAL IP
▶ TERMINAL IP menu contains DHCP EN/DISABLE, IP ADDRESS, SUBNET MASK,
GATEWAY and DNS buttons. If you press DHCP EN/DISABLE button will change
DHCP status, ENABLE to DISABLE, or DISABLE to ENABLE. In case of DHCP is
disabled, IP ADDRESS, SUBNET MASK, GATEWAY and DNS buttons will be
displayed.
If DHCP value is ENABLE, ATM uses DYNAMIC IP to connect to host. Otherwise,
ATM uses STATIC IP. If you change DHCP value from ENABLE to DISABLE, you
should set up STATIC IP again use IP ADDRESS, SUBNET MASK, GATEWAY and
DNS buttons.
It is able to input up to 15 units such as XXX.XXX.XXX.XXX
© Hyosung TNS Inc. All Rights Reserved.
Chapter 3. SUPERVISOR MENU
3-95
Advertisement
Table of Contents
