Table of Contents
Advertisement
Operator Function
REMOTE MONITOR
▶ Display which is to set the information for using Remote Management System (RMS)
3-148
1. RMS EN/DISABLE function is used to connect to the RMS mode to enable or to
disable. The default option is "ENABLE".
2. RMS STATUS SEND EN/DISABLE function is used to send the status message to
RMS in enable or in disable.
3. The RMS PASSWORD function is used to set the RMS password to connect to
ATM from RMS.
© Hyosung TNS Inc. All Rights Reserved.
Chapter 3. SUPERVISOR MENU
Advertisement
Table of Contents
