Table of Contents
Advertisement
Chapter 6. QUICK CONFIGURATION
MESSAGE FORMAT
▶ This menu sets up message format to use during communicating with Host.
You can select one of message type to communicate with a data processing company
or bank in this menu (STANDARD1, STANDARD2, STANDARD3 and EPS).
STANDARD 1 is a HYOSUNG message type and STANDARD 2 is a CSP200
message type, STANDARD 3 is Triton 9600 message type and EPS is an extended
CSP200 message type.
<Note!>
When you press NEXT button, if you configured MESSAGE FORMAT to STANDARD
3, then it goes to Section "STANDARD3 OPTION". If not, then it goes to Section
"ROUTING ID"
© Hyosung TNS Inc. All Rights Reserved.
Operator Function
6-9
Advertisement
Table of Contents
