Table of Contents
Advertisement
Operator Function
TCP/IP TYPE
▶ In case of supporting TCP/IP, this is providing a function setting up communication flow
6-4
to use when communicating with host. In this menu, you can change TCP/IP TYPE
and can decide whether 'ENABLE' or 'DISABLE' about SSL OPTION. There are three
kind of TCP/IP type in this TCP/IP COMMUNICATION menu
(STANDARD TCP/IP, VISA FRAMED TCP/IP, and ACK CONTROLLED TCP/IP).
<Note!>
When you press NEXT button, if you configured TCP/IP TYPE to VISA FRAMED, then
it goes to Section "EOT/ENQ OPTION". If not, then it goes to Section "HOST
ADDRESS"
SSL CERT. EN/DISABLE was explained before. So in this chapter it will be skipped.
© Hyosung TNS Inc. All Rights Reserved.
[The screen except for USA]
[The screen for USA]
Chapter 6. QUICK CONFIGURATION
Advertisement
Table of Contents
