Table of Contents
Advertisement
Operator Function
AUTO DAY TOTAL
▶ AUTO DAY TOTAL feature allows the ATM to complete a Day Total operation
3-154
(Without Actually closing out the machine) at a predetermined time each day. This is
useful if you are doing accounting of your ATM on a day-to-day basis. Your processor
cuts off its transactions each day at a set time. By enabling Auto Day Total at the same
time, your day's balance should match the host. This information will appear as a
journal record so, you will need to access your journal to print or view the totals.
1. EN/DISABLE
▪ Display whether AUTO DAY TOTAL function is enabled or not.
▪ Set the value using EN/DISABLE button.
2. TOTAL TYPE
▪ Display AUTO DAY TOTAL TYPE
DAY TOTAL: ATM sends total to your processor then initialize total
TRIAL DAY TOTAL: ATM sends total to your processor
▪ Set the value using TOTAL TYPE button.
3. HOUR / MINUTE
▪ Display the time for the ATM to total itself
▪ Set the value using HOUR and MINUTE button.
© Hyosung TNS Inc. All Rights Reserved.
Chapter 3. SUPERVISOR MENU
Advertisement
Table of Contents
