Table of Contents
Advertisement
Chapter 6. QUICK CONFIGURATION
TERMINAL DHCP
▶ If DHCP value is ENABLE, ATM uses DYNAMIC IP to connect to host. Otherwise,
ATM uses STATIC IP. If you configure DHCP value to DISABLE and press NEXT, it
goes to TERMINAL IP SETUP Screen.
<Note!>
When you press NEXT button, if you configured DHCP to DISABLE, then it goes to
Section "TERMINAL IP". If not, then it goes to Section "MESSAGE FORMAT"
© Hyosung TNS Inc. All Rights Reserved.
Operator Function
6-7
Advertisement
Table of Contents
