Table of Contents
Advertisement
Operator Function
SYSTEM CONTROL
▶ This SYSTEM CONTROL menu contains SOFTWARE UPDATE, REBOOT /
3-112
SHUTDOWN, BACKUP ALL JOURNAL TO USB, BACKUP JOURNAL BY DATE TO
USB, BACKUP LOG TO USB, BACKUP NVRAM, RESTORE NVRAM and CLEAR
NVRAM.
Please press each button on this menu to go to next screen or to operate the related
function.
And if you want to go back to the previous screen, press the CANCEL key.
You can back up a various kinds of journal data and log data you want in this menu.
Please make sure that USB drive is connected into USB slot before pressing the
button. When BACKUP ALL JOURNALS TO USB, BACKUP JOURNAL BY DATE
TO USB or BACKUP LOG TO USB button is selected, this data will be sent into USB
flash drive. When SOFTWARE UPDATE is entered, it will change to the screen of
SOFTWARE UPDATE. This is because Software Update functionality is supported at
SYSTEM CONTROL menu. When SYSTEM CONTROL is submitted the files in USB
flash drive will be copied to the ATM.
Terminal configuration data is saved at NVRAM, so BACKUP NVRAM and RESTORE
NVRAM button is to use the backup and restore terminal configurations.
<Note!>
1. How to update the software, please refer to the Appendix.
2. BACKUP NVRAM and RESTORE NVRAM Button is only displayed when security
door is opened.
© Hyosung TNS Inc. All Rights Reserved.
Chapter 3. SUPERVISOR MENU
Advertisement
Table of Contents
