Table of Contents
Advertisement
Operator Function
1. RMS STATUS SEND
▪ Display whether RMS STATUS SEND function is enabled or not.
▪ Set the value using EN/DISABLE button.
2. RMS INTERVAL
▪ Display "RMS STATUS SEND" cycle (unit: hours)
▪ Set the value using INTERVAL button. (Input the number from 1 to 24.)
3. URL EN/DISABLE
▪ Display whether to use URL or IP ADDRESS. If the value is ENABLE, that means
the ATM uses URL ADDRESS.
▪ Set the value using URL EN/DISABLE button.
4. RMS ADDRESS
▪ Display "RMS ADDRESS".
▪ Set the value using RMS ADDRESS button. If you press this button, It goes to next
screen.
5. RMS LISTENNING PORT
▪ Display "RMS LISTENING PORT".
▪ Set the value using RMS LISTENING PORT button. (Input the number from 0 to
65535)
▪ Default port is 9999
© Hyosung TNS Inc. All Rights Reserved.
Chapter 3. SUPERVISOR MENU
[TCP/IP]
3-151
Advertisement
Table of Contents
