Table of Contents
Advertisement
800961-C Nov. 2000
区 JALLINCKRODT
ELECTRONICS CABINET
Remote Handswitch Connection
An 8-pin circular DIN connection allows for interfacing with an
optional remote handswitch.
Printer Connection
An 8-pin circular mini-DIN connection allows for interfacing with an
optional printer.
Primary Console
A 15-pin D-shell connection sends and receives information to and
from the Console,
Secondary Console
A second 15-pin D-shell connection sends and receives information
to and from an optional second Console.
Powerhead Connection
A 25-pin D-shell connection sends and receives information to and
from the powerhead.
Power Cord Connection
The supplied power cord connects to the Electronics Cabinet at the
power connection. The unit can accept either 115 VAC (50/60 Hz)
or 220 VAC (50/60 Hz) without modification. The unit will automati-
cally sense the input voltage during power-up sequences.
CAUTION!
Use only the supplied power cord to connect power to the Power Cord
Connection. Use of other power cords could result in damage to the
equipment. Units installed outside of the U.S. must use hospital approved
power cards.
POWERHEAD
Heater Blanket Connection
A 4-pin connection, located on the bottom of the Powerhead, sends
and receives information to and from the Heater Blanket.
ELECTRONICS CABINET CONNECTION
Advertisement
Table of Contents
