Table of Contents
Advertisement
CT 9000 * ADV
A 25-pin connection, located on the bottom of the Powerhead,
sends and receives information to and from the Electronics Cabi-
net.
CONSOLE
Electronics Cabinet Connection
A 15-pin connection, located on the rear of the console, sends and
receives information to and from the Electronics Cabinet.
©
install the Pressure Plate Assembly. Instructions covering
installation. of the Pressure Plate Assembly are contained in
the Operator's Manual, P/N 800731, or 800959 international.
©
Perform the Preventive Maintenance Checks listed in
Chapter 6. If all requirements for these tests are passed,
then proceed to the next section.
TURN ON THE CT 9000 ADV
Turn the unit on by first toggling the Power pack's Power Switch
located on the rear of the cabinet and then pushing the Console
power switch located on the left-hand side of the console. The LED
located on the Power pack and on the upper right-hand comer of
the console will glow and the Start-up Menu will be displayed.
ANNNL4
NON.
anna
Advertisement
Table of Contents
