Table of Contents
Advertisement
CT 9000? ADV
©
Inspect the exterior of the Power pack:
Check the Power pack cabinet for dents or scratches.
Check the connectors located on the rear of the cabinet for
cracks or protruding pins.
Inspect the exterior of the Powerhead:
Check the cable for nicks or impairment due to crimping.
Check the Heater connector and the Powerhead Cable
connector for cracks or bent pins.
inspect the Console cable, the Powerhead cable and the
Power Cord. Check each cable for nicks or impairment due
to crimping.
Check the Power Cord for nicks or impairment due to crimp-
ing.
Inspect each Accessory to ensure there are no dents or
scratches.
Mounting the Powerhead, Power pack and Console will
depend on the type of accessories ordered. Refer to the
Installation Instructions that accompanies the accessories in
order to mount the components to your desired configura-
tion.
Power musi be off before connecting or disconnecting the
system's cabling. Connecting cabies after the Unit is pow-
ered may cause generation of false error messages. System
connections are as follows:
onnnos
m
am.
nana
Advertisement
Table of Contents
