Table of Contents
Advertisement
7.
Select the appropriate printer from the list. The Port Handler Type window
appears.
8.
Select the Novell Port Handler. The connection type window appears.
9.
Select the correct connection type from the following options:
Local Printer — You are attached directly to the server where NDPS MGR is
loaded.
Manual — This option allows you to manually build Port Handler.
Queue-Based Printer — This option will re-direct jobs to a NetWare queue.
Remote Printer RP/SPX — This allows you to create a PA to represent a printer
running RP mode.
Remote Printer LPR-TCP/IP — This option allows you to create a printer
agent to represent a printer configured with LPR mode for TCP/IP.
10.
Select Remote Printer LPR/TCP/IP. Enter in the information requested.
11.
Accept and Exit the configuration.
Using the Remote Printer LPR/TCPIP Option from the Server Console.
1.
Follow steps 1-8 in the previous procedure, "Creating NDPS Printers at the
Server Console."
2.
Select Remote Printer LPR/TCPIP from the connection type menu.
3.
Provide the information in the screen.
4.
Select Accept and then Exit.
This loads the Printer Agent with its associated Port Handler. The Port Handler
configuration is closed and you return to the NDPS Manager.
4-10 – TCP/IP Configuration
Advertisement
Chapters
Table of Contents
