Xante AW 1200 User Manual page 108

The IDE upgrade contains the following:
• IDE hard disk
• IDE ribbon cable
Static electricity can destroy the printer's electronic components. Always use an
antistatic procedure when working with the controller board. Use an anti-static
wristband or touch an unpainted metal surface to eliminate static electricity before
handling a circuit board. When handling a board, always hold it by the edges and
avoid walking around, particularly on carpeted surfaces.
Required Equipment:
• Small magnetized Phillips head screw driver
• Container to hold parts removed from printer
• Small magnetized flat head screw driver
To install an IDE hard disk upgrade
1. Access the controller board (fig. 6.15) following the procedure in "Accessing
the Controller Board" earlier in this chapter.
Fig. 6.15 Controller Board
6-16 – Printing on Various Media and Options
• 4 hexagon nylon stand-off posts
• 4 nylon screws