Utility Pages; Cd-Rom Postscript Files And Programs: Feature Access - Xante AW 1200 User Manual

Utility Pages

The Utility Pages option allows you to print the following four utility pages:
Start Page — prints a page with basic printer information such as the printer's current
name, resolution, page count, amount of installed RAM, number of resident fonts,
EtherTalk and LPR status, and the Ethernet and IP addresses.
Low Toner Page — prints a toner reorder form which you can fill out and return to
XANTÉ or your XANTÉ vendor.
Font List Page — prints a list of the Adobe PostScript 3 fonts resident on your
XANTÉ PostScript 3 printer.
Font Sample Page — prints samples of Adobe PostScript 3 fonts resident on your
XANTÉ PostScript 3 printer.
1. Go to the printer home page (fig. 5.7). See "Printer Home Page" earlier in this
chapter for details.
2. Select Utility Pages under Options (fig. 5.8). The Utilities Pages window
appears (fig. 5.27).
Fig. 5.27 Utilities Pages Window
3. Select Print to the right of the utility page you wish to print (Startup Page, Low
Toner Page, Font List Page, or Font Sample Page). Depending on the selected
page, printing takes approximately 6 to 20 seconds.
4. Close your browser.

CD-ROM PostScript Files and Programs: Feature Access

You can access and control many printer features via programs and PostScript files on
the XANTÉ Utilities CD-ROM that comes with your printer. For example, you can
use PostScript files to set your printer's EtherTalk zone name, control startup page
printing, or initialize an internal hard disk.
5-18 – XANTÉ Utilities: Macinstosh and PC