Xante AW 1200 User Manual page 32

Ftp.ps prints instructions for uploading from and downloading files to XANTÉ's FTP
(File Transfer Protocol) site.
Initdsk.ps files are used to initialize hard disk installed in your printer.
A hard disk must be initialized before it can be used to store downloaded fonts.
Initializing a disk erases all information stored on that disk.
Parmdump.ps prints a list of current settings for the communication devices
configured for your printer.
Prnipsub.ps allows you to print the IP address, subnet mask, and default gateway.
Setip.ps allows you to set your printer's IP address. Open the file in a text editor and
change the IP address in the parentheses to your printer's IP address. Save the file, and
download it to your printer. The printer must be restarted before the change is effective.
Setipsub.ps allows you to modify the IP address, subnet mask, and default gateway.
Setname.ps allows you to change the printer's name.
Setzone.ps allows you to set your printer's EtherTalk zone name. Open the file in a
text editor and change "name of zone" in the parentheses to the name of your
EtherTalk zone. Save the file, and download it to your printer. The printer must be
restarted before the change is effective.
Startpg.off disables the printer's start-up page feature, which prevents it from printing
automatically each time the printer is restarted. See "Printing a Startup Page" in
chapter 1 for details.
Startpg.on enables the start-up page feature, which causes a page to print
automatically each time the printer is restarted. See "Printing a Startup Page" in
chapter 1 for details.
Startpg.ps allows you to print the printer's start-up page.
Sysparm.ps prints a list of current system parameters.
Dhcp.off allows you to disable the DHCP protocol.
Dhcp.on allows you to enable the DHCP protocol.
PC: Installing Utilities and Drivers 3-29