Table of Contents
Advertisement
To access printer configuration features
1.
Go to the printer home page (fig. 5.7). See "Printer Home Page" earlier in this
chapter for details.
2.
Select Printer Configuration (fig. 5.7); printer configuration options appear
(fig. 5.8).
Fig. 5.8 Printer Configuration Options
Printer Configuration has five major options, I/O Configuration, Informational Pages,
Media Types, PostScript Margins, and Reset to Factory Defaults (fig. 5.8).
I/O Configuration (EtherTalk and Network)
The I/O Configuration options allow you to control EtherTalk and Network settings.
EtherTalk Settings
On an EtherTalk network with more than one zone, the network router assigns your
printer a default zone. Check with your System Administrator to determine the
correct zone for your printer; then, if necessary change the printer's zone name. Also,
if more than one printer of the same model is on the Ethernet network, you may want
to change the printer name to avoid confusion or just to personalize the printer.
To configure EtherTalk settings:
1.
Go to the printer home page (fig. 5.7). See "Printer Home Page" earlier in this
chapter for details.
2.
Select Printer Configuration (fig. 5.7). Then, select EtherTalk (fig. 5.8). The
EtherTalk Configuration window appears (fig. 5.9).
XANTÉ Utilities: Macintosh and PC – 5-7
Advertisement
Chapters
Table of Contents
