Xante AW 1200 User Manual page 82

4. Slide the cassettes back into the printer making sure they snap in place; then,
tape them into place on the front and back (figs. 8.22 and 8.23).
Fig. 8.22 Tape Cassette Fronts
5. Place the two base cardboard pieces in the bottom of the shipping box (fig.
8.24).
Bottom
Shipping
Stabilizers
Power Cord
(Inside Bottom
Shipping Stabilizer)
Fig. 8.24 Reassemble Shipment Package
The printer weighs approximately 27 lbs (12 kg) without toner, cassettes, and media
installed. Always lift the printer from the bottom recessed grip areas on each side (not
from cassette openings) and keep it level within 5 .
8-22 – Troubleshooting
Fig. 8.23 Tape Cassette Backs
Top
Shipping
Stabilizers
Toner
Cartridge
Printer