Connecting The Usb Interface; Connecting The Network Interface - Xante Ilumina GL User Manual

Connect the Parallel Cable
3. Turn on the Ilumina and then the computer.

Connecting the USB Interface

Do not connect the USB cable at this time. You will be instructed when to connect
the USB cable when you run the Drivers CD.
If you are connecting your Ilumina directly to a stand alone computer proceed to the
section entitled "Printer Drivers."

Connecting the Network Interface

1. Turn off the Ilumina and the computer.
2. Connect an Ethernet cable between the Ilumina and an Ethernet hub.
36 Ilumina GL Users Guidebb