Table of Contents
Advertisement
Preparing to Install - Included in the Package
CONFIGURE YOUR CLOCK BEFORE MOUNTING IT TO A WALL. REFER TO THE SYNCHRONIZATION
SYSTEM SETUP SECTION OF THIS MANUAL FOR INSTRUCTIONS.
Included in the Package
Description
Prayer Clock
Mounting plate
Upper Mounting bracket (D-LG-TFLAT-BRKT-1)
Lower Mounting bracket (D-LG-BFLAT-BRKT-1)
Locking Screw
10-32 3/8" Screw
Clock Mounting Template
RJ45 Female to Female Connector
*You will also need eight screws and wall anchors to mount the clock to the wall (4 per each mounting
plate provided). The type of screw and wall anchor you select depends on the material of the wall and
the weight of the clock(s) you're installing. The screw thread should NOT exceed the 0.375" (0.95cm)
diameter of the hole and should be able to withstand pullout and sheer forces of 500lbs (227kg).
VERY IMPORTANT:
Quantity
1
2
1
1
1
8
1
1
The Sapling Company, Inc.
The Sapling Company, Inc.
670 Louis Drive
670 Louis Drive
Warminster, PA 18974
Warminster, PA 18974
USA
USA
Picture
P. (+1) 215.322.6063
P. (+1) 215.322.6063
F. (+1) 215.322.8498
F. (+1) 215.322.8498
www.sapling-inc.com
www.sapling-inc.com
7
7
Advertisement
Table of Contents
Need help?
Do you have a question about the Prayer Clock and is the answer not in the manual?
Questions and answers