Related Manuals for Sapling SALG Series
Summary of Contents for Sapling SALG Series
- Page 1 Installation Manual V5.5 SAL/SALG Series Wireless Clock The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Current as of July 2016...
-
Page 2: Table Of Contents
- Locally Powered SECONDARY WIRELESS CLOCKS 30 - 33 - Square Clock - Battery Powered A Sapling Master Clock and any Repeaters must 34 - 37 - Locally Powered be properly installed, powered, and set up BEFORE Flag Mount Installation - you attempt to set up a wireless clock system. -
Page 3: Important Safety Instructions
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Important Safety Instructions DANGER WARNING SHOCK HAZARD FIRE HAZARD • Keep the electricity to this device • Always follow your national and turned OFF until the clock installation regional electrical codes or ordinances. -
Page 4: Identify Your Clock
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Identify Your Clock A label containing the part number of your clock is attached to the clock movement. If your part number begins with SAL-2 or SALG-2, you own a STANDARD ABS clock... -
Page 5: Synchronization System Setup
INSTALL, POWER, AND SET YOUR MASTER CLOCK OR REPEATER BEFORE POWERING THE SECONDARY WIRELESS CLOCKS A Sapling Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize. -
Page 6: Locally Powered
Transmitter, and continue the process. System Setup Options There are three ways to operate a system of Sapling’s SAL/SALG Series Wireless clocks. The user may choose one or a combination of the options listed below: 1. No clocks are used for transmission. This option should only be taken if the user already has a main high-powered transceiver and as many repeaters as needed to cover the premises. - Page 7 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Synchronization System Setup (ctd.) System Option 1 No clocks are being used for transmission. This option should only be taken if the user already has a main high-powered transceiver and as many repeaters as needed to cover the premises.
-
Page 8: Wall Mount Installation
WIRELESS CLOCKS A Sapling Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize. - Page 9 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round Standard ABS Clock 1) Use the mounting bracket, a pencil, and a level to 2) Place the two wall anchors into the holes, then...
-
Page 10: Wall Mount Installation
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round Standard ABS Clock 5) Place the cover back onto the battery pack. You 6) Slide the long, protruding part of the mounting should hear a snapping noise as the latches engage. -
Page 11: Locally Powered
WIRELESS CLOCKS A Sapling Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize. - Page 12 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round Standard ABS Clock 1) Install the single gang box in the wall. Leave at 2) Run power wiring to the gang box.
- Page 13 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round Standard ABS Clock 6) First remove the gearbox pin, then attach the 5) Place the two wall anchors into the holes, then screw the two #10 self-tapping screws through the power connector to the port on the movement.
- Page 14 WIRELESS CLOCKS A Sapling Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize.
- Page 15 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round SlimLine Clock - Battery Powered 1) Place the mounting piece on the wall. Leave at 2) Use a pencil to mark the positions of the top two...
- Page 16 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round SlimLine Clock - Battery Powered 5) First remove the gearbox pin, then insert the 6) Place the cover back onto the battery pack. You batteries into the clock.
-
Page 17: Locally Powered
WIRELESS CLOCKS A Sapling Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize. -
Page 18: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round SlimLine Clock - Locally Powered 1) If you are installing a new gang box in the wall, 2) Run power wiring to the gang box. -
Page 19: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round SlimLine Clock - Locally Powered 5A) If you do not wish to attach the mounting piece 5B) Use a pencil to mark the positions of the top... -
Page 20: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round SlimLine Clock - Locally Powered 7) First remove the gearbox pin, then attach the 8) Lay any excess wiring across the strain relief base, power connector to the port on the movement. -
Page 21: Round Aluminum/Wood Clock - Battery Powered
WIRELESS CLOCKS A Sapling Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize. - Page 22 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round Aluminum or Wood Clock - Battery Powered 1) Place the flat side of the mounting piece on the 2) Use a pencil to mark the positions of the two wall.
- Page 23 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round Aluminum or Wood Clock - Battery Powered 6) First remove the gearbox pin, then insert the 5) Remove the back cover from the battery pack by pulling the two latches away to either side and batteries into the clock.
- Page 24 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com 9 10 Wall Mount Installation - Round Aluminum or Wood Clock - Battery Powered 9) Use the pencil to mark the location of the hole 10) Reattach the mounting piece and clock.
-
Page 25: Locally Powered
WIRELESS CLOCKS A Sapling Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize. -
Page 26: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round Aluminum or Wood Clock - Locally Powered 1) If you are installing a new gang box in the wall, 2) Run power wiring to the gang box. -
Page 27: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round Aluminum or Wood Clock - Locally Powered 5 6A 5) If you do not wish to attach the mounting piece 6A) If you do not wish to attach the mounting piece to the gang box, proceed to step 6A. -
Page 28: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round Aluminum or Wood Clock - Locally Powered 8) Temporarily attach the clock to the mounting 7) Place the mounting piece on the wall above the... -
Page 29: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round Aluminum or Wood Clock - Locally Powered 11) Attach the clock to the mounting piece by 12) Place one of the self-tapping screws through sliding the clock back onto it. - Page 30 WIRELESS CLOCKS A Sapling Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize.
- Page 31 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Square Clock - Battery Powered 2) Release the mounting piece from the back of 1) Detach the housing from the back of the clock.
- Page 32 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Square Clock - Battery Powered 5) Insert the wall anchors into the holes, then place 6) Remove the back cover from the battery pack...
- Page 33 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Square Clock - Battery Powered 9) Slide the clock housing onto the mounting piece. 10) If you wish to prevent the clock from sliding...
-
Page 34: Locally Powered
WIRELESS CLOCKS A Sapling Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize. -
Page 35: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Square Clock - Locally Powered 1) If you are installing a new gang box in the wall, 2) Run power wiring to the gang box. -
Page 36: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Square Clock - Locally Powered 5) Thread the power wires from your kit through 6) Attach the mounting piece to the gang box using... -
Page 37: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Square Clock - Locally Powered 9) First remove the gearbox pin, then attach the 10) Loosen the strain relief by unscrewing the two power connector to the port on the movement. - Page 38 WIRELESS CLOCKS A Sapling Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize.
-
Page 39: Round Standard Abs Clock - Battery Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round Standard ABS Clock - Battery Powered Included in Adapter Kit (A-MOUNT-12S-2) or (A-MOUNT-16S-2) Description Quantity Picture Round Clock Adapter... -
Page 40: Round Standard Abs Clock - Battery Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round Standard ABS Clock - Battery Powered 1) Detach the mounting plate from the mounting 2) Place the mounting plate on the wall or ceiling. -
Page 41: Round Standard Abs Clock - Battery Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round Standard ABS Clock - Battery Powered 5 5B 5) Insert the #8 screws through the mounting plate 5B) If you are installing the clock atop an gang box, and into the anchors. -
Page 42: Round Standard Abs Clock - Battery Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round Standard ABS Clock - Battery Powered 8) Attach the base of the pole to the mounting plate so that the lip is on the top of the base, and the holes for the screws are on the bottom of the base. -
Page 43: Round Standard Abs Clock - Battery Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round Standard ABS Clock - Battery Powered 11) Place the cover back onto the battery pack. You 12) Slide each clock onto the adapter in the rotation should hear a snapping noise as the latches engage. -
Page 44: Locally Powered
WIRELESS CLOCKS A Sapling Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize. -
Page 45: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round Standard ABS Clock - Locally Powered Included in Adapter Kit (A-MOUNT-12S-2) or (A-MOUNT-16S-2) Description Quantity Picture Round Clock Adapter... -
Page 46: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round Standard ABS Clock - Locally Powered 1) Install the double gang box in the wall or ceiling. -
Page 47: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round Standard ABS Clock - Locally Powered 5) Remove the mounting plate and drill the four 6) Reattach the mounting plate, this time using all holes that were just traced. -
Page 48: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round Standard ABS Clock - Locally Powered 9) Insert the four #8-32x7/16 screws through the 10) Thread at least fifteen inches (38.1cm) of wiring... -
Page 49: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round Standard ABS Clock - Locally Powered 12) Attach the power wires from your kit to the 13) First remove the gearbox pin, then attach wires you threaded through the pole. -
Page 50: Round Slimline/Aluminum Clock - Battery Powered
WIRELESS CLOCKS A Sapling Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize. - Page 51 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock - Battery Powered Included in Mounting Kit (A-SLM-MK-S-1) or (A-SLM-MK-AW) Description Quantity Picture Mounting Piece...
- Page 52 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock - Battery powered 1) Detach the mounting plate from the mounting 2) Place the mounting plate on the wall or ceiling.
- Page 53 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock - Battery powered 5 5B 5) Insert the #8 screws through the mounting plate 5B) If you are installing the clock atop an gang box, and into the anchors.
- Page 54 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock - Battery Powered 8) Thread at least fifteen inches (38.1cm) of wiring from the gang box through the bottom of the pole until each wire exits through the hole in the adapter.
- Page 55 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock - Battery Powered 10) Remove the back covers from the battery pack by pulling the two latches away to either side and sliding the cover out.
- Page 56 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock - Battery Powered 13 14 13) Slide the clock onto the adapter in the rotation 14) If you feel the need to detach the clock from the that you wish it to be viewed.
-
Page 57: Locally Powered
WIRELESS CLOCKS A Sapling Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize. -
Page 58: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock - Locally Powered Description Quantity Picture Included in Gang Box Kit (A-GB-MK-1) #6-32x1 screw (not used) -
Page 59: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock - Locally Powered 1) Install the double gang box in the wall or ceiling. 2) Run power wiring to the gang box. -
Page 60: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock - Locally Powered 5) Remove the mounting plate and drill the four 6) Reattach the mounting plate, this time using all holes that were just traced. -
Page 61: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock - Locally Powered 9 10 9) Insert the four #8-32x7/16 screws through the 10) Thread at least fifteen inches (38.1cm) of wiring... -
Page 62: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock - Locally Powered 12) Attach the power wires from your kit to the 13) First remove the gearbox pin, then attach a wires you threaded through the pole. -
Page 63: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock - Locally Powered 15 16 15) Slide the clock onto the adapter in the rotation 16) If you feel the need to detach the clock from the that you wish it to be viewed. - Page 64 WIRELESS CLOCKS A Sapling Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize.
- Page 65 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock - Battery Powered Included in Wiring Kit (A-WK-MTG-1) Description Quantity Picture #10x1.5 Self-tapping screw Wall anchor...
- Page 66 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock - Battery Powered 1) Detach the mounting plate from the mounting 2) Place the mounting plate on the wall or ceiling.
- Page 67 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock - Battery Powered 5 5B 5) Insert the #8 screws through the mounting plate 5b) If you are installing the clock atop an gang box, and into the anchors.
- Page 68 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock - Battery Powered 8) Attach the clock housing to the pole using four black #8-32x7/16 screws and four internal-tooth washers.
- Page 69 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock - Battery Powered 11) Remove the gearbox pin, then insert the 10) Remove the back covers from the battery pack by pulling the two latches away to either side and batteries into the clock.
- Page 70 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock - Battery Powered 13 14 13) Rotate the clock so that it is right-side up. Slide 14) If you feel the need to detach the clock the clock back into its housing.
-
Page 71: Locally Powered
WIRELESS CLOCKS A Sapling Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize. -
Page 72: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock - Locally Powered Included in Package Description Quantity Picture Power/grounding wires And connector (not used) #8x1.5 Self-tapping screw... -
Page 73: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock - Locally Powered 1) Install the double gang box in the wall or ceiling. 2) Run power wiring to the gang box. -
Page 74: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock - Locally Powered 5) Remove the mounting plate and drill the four 6) Reattach the mounting plate, this time using all holes that were just traced. -
Page 75: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock - Locally Powered 9 10 9) Release the mounting piece from the back of 10) Attach the clock housing to the pole using... - Page 76 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock - Locally Powered 12) Attach the base of the pole to the mounting plate, so that the lip is on the top of the base, and the holes for the screws are on the bottom of the base.
- Page 77 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock - Locally Powered 14) First remove the gearbox pin, then attach 15) Loosen the strain relief by unscrewing the two the power connector to the port on the movement.
-
Page 78: Round Standard Abs Clock - Battery Powered
WIRELESS CLOCKS A Sapling Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize. -
Page 79: Round Standard Abs Clock - Battery Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round Standard ABS Clock - Battery Powered 1) Detach the mounting plate from the mounting 2) Place the mounting plate on the wall or ceiling. -
Page 80: Round Standard Abs Clock - Battery Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round Standard ABS Clock - Battery Powered 5 5B 5) Insert the #8 screws through the mounting plate 5b) If you are installing the clock atop an gang box, and into the anchors. -
Page 81: Round Standard Abs Clock - Battery Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round Standard ABS Clock - Battery Powered 7) Remove the back cover from each battery pack by pulling the two latches away to either side and sliding the cover out. - Page 82 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round Standard ABS Clock - Battery Powered 9) lace the covers back onto each battery pack. You 10) Remove the outer adapter screws, then slide should hear a snapping noise as the latches engage.
-
Page 83: Locally Powered
WIRELESS CLOCKS A Sapling Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize. - Page 84 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round Standard ABS Clock - Locally Powered 1) Install the double gang box in the wall or ceiling.
-
Page 85: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round Standard ABS Clock - Locally Powered 5) Remove the mounting plate and drill the four 6) Reattach the mounting plate, this time using all holes that were just traced. -
Page 86: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round Standard ABS Clock - Locally Powered 9) Attach the base of the pole to the mounting plate so that the lip is on the top of the base, and the holes for the screws are on the bottom of the base. - Page 87 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com 11 12 Double Mount Installation - Round Standard ABS Clock - Locally Powered 12) Remove the outer adapter screws, then slide 11) First remove the gearbox pins, then attach the each clock onto the adapter in the rotation that you power connector to the port on each movement.
-
Page 88: Round Slimline/Aluminum Clock - Battery Powered
WIRELESS CLOCKS A Sapling Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize. - Page 89 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round SlimLine/Aluminum Clock - Battery Powered Included in Mounting Kits (A-SLM-MK-S-1) or (A-SLM-MK-AW) Description Quantity Picture Mounting Piece...
- Page 90 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round SlimLine/Aluminum Clock - Battery Powered 1) Detach the mounting plate from the mounting 2) Place the mounting plate on the wall or ceiling.
- Page 91 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round SlimLine/Aluminum Clock - Battery Powered 5 5B 5) Insert the #8 screws through the mounting plate 5B) If you are installing the clock atop an gang box, and into the anchors.
- Page 92 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round SlimLine/Aluminum Clock - Battery Powered 7) Remove the back covers from the battery pack by pulling the two latches away to either side and sliding the cover out.
- Page 93 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com 10 11 Double Mount Installation - Round SlimLine/Aluminum Clock - Battery Powered 10) Slide each clock onto the adapter in the rotation 11) If you feel the need to detach the clock from the that you wish it to be viewed.
- Page 94 WIRELESS CLOCKS A Sapling Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize.
-
Page 95: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round SlimLine/Aluminum Clock - Locally Powered Included in Mounting Kits (A-SLM-MK-S-1) or (A-SLM-MK-AW) Description Quantity Picture Mounting Piece... -
Page 96: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round SlimLine/Aluminum Clock - Locally Powered 1) Install the double gang box in the wall or ceiling. 2) Run power wiring to the gang box. -
Page 97: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round SlimLine/Aluminum Clock - Locally Powered 5) Remove the mounting plate and drill the four 6) Reattach the mounting plate, this time using all holes that were just traced. -
Page 98: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round SlimLine/Aluminum Clock - Locally Powered 9) Attach the base of the pole to the mounting plate so that the lip is on the top of the base, and the holes for the screws are on the bottom of the base. -
Page 99: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com 11 12 Double Mount Installation - Round SlimLine/Aluminum Clock - Locally Powered 11) First remove the gearbox pins, then attach a 12) Lay any excess wiring across the strain relief... - Page 100 WIRELESS CLOCKS A Sapling Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize.
- Page 101 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock - Battery Powered Included in Wiring Kit (A-WK-MTG-1) Description Quantity Picture #10x1.5 Self-tapping screw Wall anchor...
- Page 102 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock - Battery Powered 1) Detach the mounting plate from the mounting 2) Place the mounting plate on the wall or ceiling.
- Page 103 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock - Battery Powered 5 5B 5) Insert the #8 screws through the mounting plate 5B) If you are installing the clock atop an gang box, and into the anchors.
- Page 104 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock - Battery Powered 8) Release the mounting piece from the back of 9) Attach both housings to the pole using four black...
- Page 105 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock - Battery Powered 11) Attach the base of the pole to the mounting plate, so that the lip is on the top of the base, and the holes for the screws are on the bottom of the base.
- Page 106 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com 14 15 Double Mount Installation - Square Clock - Battery Powered 14) Place the cover back onto the battery pack. You 15) Slide both clocks back into their housings. You should hear a snapping noise as the latches engage.
-
Page 107: Locally Powered
WIRELESS CLOCKS A Sapling Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize. -
Page 108: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock - Locally Powered Included in Wiring Kit (A-WK-12-1V) Description Quantity Picture Power/grounding wires And connector #8x1.5 Self-tapping screw... -
Page 109: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock - Locally Powered 2) Run power wiring to the gang box. 1) Install the double gang box in the wall or ceiling. -
Page 110: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock - Locally Powered 5) Remove the mounting plate and drill the four 6) Reattach the mounting plate, this time using all holes that were just traced. -
Page 111: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock - Locally Powered 9 10 9) Release the mounting piece from the back of 10) Attach both housings to the pole using four... -
Page 112: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock - Locally Powered 13) Attach the base of the pole to the mounting plate, so that the lip is on the top of the base, and the holes for the screws are on the bottom of the base. -
Page 113: Locally Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com 15 16 Double Mount Installation - Square Clock - Locally Powered 15) First remove the gearbox pins, then attach a 16) Loosen the strain relief by unscrewing the two power connector to the ports on the side of screws. -
Page 114: Legacy Movement - Battery Powered
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Legacy Movement - Battery Powered Earlier versions of the Round Standard ABS case use 1) On the clock movement, press the battery cover a different movement design (pictured below). -
Page 115: Frequently Asked Questions
INSTALL, POWER, AND SET YOUR MASTER CLOCK OR REPEATER BEFORE POWERING THE SECONDARY WIRELESS CLOCKS A Sapling Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize. -
Page 116: Frequently Asked Questions
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Frequently Asked Questions • If the clock is battery-powered and in Economy mode, it will attempt to acquire the time signal once every four hours. -
Page 117: Troubleshooting
INSTALL, POWER, AND SET YOUR MASTER CLOCK OR REPEATER BEFORE POWERING THE SECONDARY WIRELESS CLOCKS A Sapling Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize. - Page 118 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Troubleshooting If the clock is properly receiving power, follow the instructions listed under “Manually Setting a Connection between two or more SALs”.
-
Page 119: Diagnostic #1 - Signal Information
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Diagnostic Test #1 - Signal Information The purpose of Diagnostic #1 is to determine how long it has been since the clock last received a Green synchronization signal. -
Page 120: Diagnostic #3 - Manufacturing Default
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Diagnostic Test #2 - Signal Quality The purpose of Diagnostic #2 is to determine the quality of the synchronization signal. Green Diagnostic #2 may be enabled by pressing the diagnostic button twice. -
Page 121: Diagnostic #4 - Battery Voltage
The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Diagnostic Test #3 - Manufacturing Default (ctd.) While performing Diagnostic #3, an observer may see the clock do the following actions: Green 1. - Page 122 Sapling Limited Warranty and Disclaimer The Sapling Company, Inc. warrants only that at the time of delivery and for a period of 24 calendar months after delivery or the period stated in this invoice, if different, the Goods shall be free of defects in workmanship and materials, PROVIDED that this warranty shall not apply: To damage caused by Buyer’s or any third party’s act, default or misuse of the Goods or by failure to follow...
- Page 123 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com FCC Statements The Federal Communications Commission (FCC) wants you to know: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
Need help?
Do you have a question about the SALG Series and is the answer not in the manual?
Questions and answers