Sapling Saw 4 Installation Manual
  1. Manuals
  2. Brands
  3. Sapling Manuals
  4. Clock
  5. Saw 4
  6. Installation manual

Sapling Saw 4 Installation Manual

Wi-fi clock saw series
Hide thumbs
Table of Contents

Advertisement

Quick Links

Installation Manual V1.0.2
SAW Series Wi-Fi Clock
Current as of January 2017
The Sapling Company, Inc.
P. (+1) 215.322.6063
1633 Republic Road
F. (+1) 215.322.8498
Huntingdon Valley, PA 19006
www.sapling-inc.com
USA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Saw 4 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Sapling Saw 4

Summary of Contents for Sapling Saw 4

  • Page 1 Installation Manual V1.0.2 SAW Series Wi-Fi Clock The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Current as of January 2017...

  • Page 2: Table Of Contents

    - Error Messages SECTION OF THIS MANUAL FOR INSTRUCTIONS. A Sapling Master Clock and any Repeaters must be properly installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If the Master Clock and Repeaters are not powered, the clocks will not synchronize.

  • Page 3: Important Safety Instructions

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Important Safety Instructions DANGER WARNING SHOCK HAZARD FIRE HAZARD • Keep the electricity to this device • Always follow your national and turned OFF until the clock installation regional electrical codes or ordinances.

  • Page 4: Identify Your Clock

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Identify Your Clock A label containing the part number of your clock is attached to the clock movement. If your part number begins with SAW-4, you own a SlimLine ABS or SQUARE clock...

  • Page 5: Preparing To Install - System/Network Requirements

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Preparing to Install - System/Network Requirements To be able to set up an IP-based synchronized clock network, you will need the following items: •...

  • Page 6: Synchronization System Setup

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Synchronization System Setup Positioning the Wireless Router or Wireless Access Point (WAP): The main router or WAP should be installed in a central location. Depending on the transmission protocol...

  • Page 7: Synchronization System Setup

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Synchronization System Setup (ctd.) 6. In the Network field, enter the SSID of your preferred Wi-Fi network. This is the name that appears if you try to connect to that Wi-Fi network on any other computer, tablet, or smart phone.

  • Page 8: Wall Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round SlimLine Clock - Battery Powered VERY IMPORTANT: CONFIGURE YOUR CLOCK BEFORE MOUNTING IT TO A WALL OR HOUSING. REFER TO THE SYNCHRONIZATION SYSTEM SETUP SECTION OF THIS MANUAL FOR INSTRUCTIONS.

  • Page 9: Wall Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round SlimLine Clock - Battery Powered 1) Place the mounting piece on the wall. Leave at 2) Use a pencil to mark the positions of the top two...

  • Page 10: Round Slimline Clock - Battery Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round SlimLine Clock - Battery Powered 5) First remove the gearbox pin, then insert the 6) Place the cover back onto the battery pack. You batteries into the clock.

  • Page 11: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round SlimLine Clock - Locally Powered VERY IMPORTANT: CONFIGURE YOUR CLOCK BEFORE MOUNTING IT TO A WALL OR HOUSING. REFER TO THE SYNCHRONIZATION SYSTEM SETUP SECTION OF THIS MANUAL FOR INSTRUCTIONS.

  • Page 12: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round SlimLine Clock - Locally Powered 1) If you are installing a new gang box in the wall, 2) Run power wiring to the gang box.

  • Page 13: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round SlimLine Clock - Locally Powered 5A) If you do not wish to attach the mounting piece 5B) Use a pencil to mark the positions of the top...

  • Page 14: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round SlimLine Clock - Locally Powered 7) First remove the gearbox pin, then attach the 8) Lay any excess wiring across the strain relief base, power connector to the port on the movement.
  • Page 15 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round Aluminum or Wood Clock - Battery Powered VERY IMPORTANT: CONFIGURE YOUR CLOCK BEFORE MOUNTING IT TO A WALL OR HOUSING. REFER TO THE SYNCHRONIZATION SYSTEM SETUP SECTION OF THIS MANUAL FOR INSTRUCTIONS.
  • Page 16 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round Aluminum or Wood Clock - Battery Powered 1) Place the flat side of the mounting piece on the 2) Use a pencil to mark the positions of the two wall.
  • Page 17 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round Aluminum or Wood Clock - Battery Powered 6) First remove the gearbox pin, then insert the 5) Remove the back cover from the battery pack by pulling the two latches away to either side and batteries into the clock.
  • Page 18 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com 9 10 Wall Mount Installation - Round Aluminum or Wood Clock - Battery Powered 9) Use the pencil to mark the location of the hole 10) Reattach the mounting piece and clock.

  • Page 19: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round Aluminum or Wood Clock - Locally Powered VERY IMPORTANT: CONFIGURE YOUR CLOCK BEFORE MOUNTING IT TO A WALL OR HOUSING. REFER TO THE SYNCHRONIZATION SYSTEM SETUP SECTION OF THIS MANUAL FOR INSTRUCTIONS.

  • Page 20: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round Aluminum or Wood Clock - Locally Powered 1) If you are installing a new gang box in the wall, 2) Run power wiring to the gang box.

  • Page 21: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round Aluminum or Wood Clock - Locally Powered 5 6A 5) If you do not wish to attach the mounting piece 6A) If you do not wish to attach the mounting piece to the gang box, proceed to step 6A.

  • Page 22: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round Aluminum or Wood Clock - Locally Powered 8) Temporarily attach the clock to the mounting 7) Place the mounting piece on the wall above the...

  • Page 23: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round Aluminum or Wood Clock - Locally Powered 11) Attach the clock to the mounting piece by 12) Place one of the self-tapping screws through sliding the clock back onto it.
  • Page 24 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Square Clock - Battery Powered VERY IMPORTANT: CONFIGURE YOUR CLOCK BEFORE MOUNTING IT TO A WALL OR HOUSING. REFER TO THE SYNCHRONIZATION SYSTEM SETUP SECTION OF THIS MANUAL FOR INSTRUCTIONS.
  • Page 25 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Square Clock - Battery Powered 2) Release the mounting piece from the back of 1) Detach the housing from the back of the clock.
  • Page 26 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Square Clock - Battery Powered 5) Insert the wall anchors into the holes, then place 6) Remove the back cover from the battery pack...
  • Page 27 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Square Clock - Battery Powered 9) Slide the clock housing onto the mounting piece. 10) If you wish to prevent the clock from sliding...

  • Page 28: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Square Clock - Locally Powered VERY IMPORTANT: CONFIGURE YOUR CLOCK BEFORE MOUNTING IT TO A WALL OR HOUSING. REFER TO THE SYNCHRONIZATION SYSTEM SETUP SECTION OF THIS MANUAL FOR INSTRUCTIONS.

  • Page 29: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Square Clock - Locally Powered 1) If you are installing a new gang box in the wall, 2) Run power wiring to the gang box.

  • Page 30: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Square Clock - Locally Powered 5) Thread the power wires from your kit through 6) Attach the mounting piece to the gang box using...

  • Page 31: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Square Clock - Locally Powered 9) First remove the gearbox pin, then attach the 10) Loosen the strain relief by unscrewing the two power connector to the port on the movement.

  • Page 32: Flag Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock - Battery Powered VERY IMPORTANT: CONFIGURE YOUR CLOCK BEFORE MOUNTING IT TO A WALL OR HOUSING. REFER TO THE SYNCHRONIZATION SYSTEM SETUP SECTION OF THIS MANUAL FOR INSTRUCTIONS.

  • Page 33: Flag Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock - Battery Powered Included in Mounting Kit (A-SLM-MK-S-1) or (A-SLM-MK-AW) Description Quantity Picture Mounting Piece...

  • Page 34: Flag Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock - Battery powered 1) Detach the mounting plate from the mounting 2) Place the mounting plate on the wall or ceiling.

  • Page 35: Flag Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock - Battery powered 5 5B 5) Insert the #8 screws through the mounting plate 5B) If you are installing the clock atop an gang box, and into the anchors.

  • Page 36: Flag Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock - Battery Powered 8) Thread at least fifteen inches (38.1cm) of wiring from the gang box through the bottom of the pole until each wire exits through the hole in the adapter.

  • Page 37: Flag Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock - Battery Powered 10) Remove the back covers from the battery pack by pulling the two latches away to either side and sliding the cover out.

  • Page 38: Flag Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock - Battery Powered 13 14 13) Slide the clock onto the adapter in the rotation 14) If you feel the need to detach the clock from the that you wish it to be viewed.

  • Page 39: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock - Locally Powered VERY IMPORTANT: CONFIGURE YOUR CLOCK BEFORE MOUNTING IT TO A WALL OR HOUSING. REFER TO THE SYNCHRONIZATION SYSTEM SETUP SECTION OF THIS MANUAL FOR INSTRUCTIONS.

  • Page 40: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock - Locally Powered Description Quantity Picture Included in Gang Box Kit (A-GB-MK-1) #6-32x1 screw (not used)

  • Page 41: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock - Locally Powered 1) Install the double gang box in the wall or ceiling. 2) Run power wiring to the gang box.

  • Page 42: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock - Locally Powered 5) Remove the mounting plate and drill the four 6) Reattach the mounting plate, this time using all holes that were just traced.

  • Page 43: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock - Locally Powered 9 10 9) Insert the four #8-32x7/16 screws through the 10) Thread at least fifteen inches (38.1cm) of wiring...

  • Page 44: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock - Locally Powered 12) Attach the power wires from your kit to the 13) First remove the gearbox pin, then attach a wires you threaded through the pole.

  • Page 45: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock - Locally Powered 15 16 15) Slide the clock onto the adapter in the rotation 16) If you feel the need to detach the clock from the that you wish it to be viewed.

  • Page 46: Flag Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock - Battery Powered VERY IMPORTANT: CONFIGURE YOUR CLOCK BEFORE MOUNTING IT TO A WALL OR HOUSING. REFER TO THE SYNCHRONIZATION SYSTEM SETUP SECTION OF THIS MANUAL FOR INSTRUCTIONS.

  • Page 47: Flag Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock - Battery Powered Included in Wiring Kit (A-WK-MTG-1) Description Quantity Picture #10x1.5 Self-tapping screw Wall anchor...

  • Page 48: Flag Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock - Battery Powered 1) Detach the mounting plate from the mounting 2) Place the mounting plate on the wall or ceiling.

  • Page 49: Flag Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock - Battery Powered 5 5B 5) Insert the #8 screws through the mounting plate 5b) If you are installing the clock atop an gang box, and into the anchors.

  • Page 50: Flag Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock - Battery Powered 8) Attach the clock housing to the pole using four black #8-32x7/16 screws and four internal-tooth washers.

  • Page 51: Flag Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock - Battery Powered 11) Remove the gearbox pin, then insert the 10) Remove the back covers from the battery pack by pulling the two latches away to either side and batteries into the clock.

  • Page 52: Flag Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock - Battery Powered 13 14 13) Rotate the clock so that it is right-side up. Slide 14) If you feel the need to detach the clock the clock back into its housing.

  • Page 53: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock - Locally Powered VERY IMPORTANT: CONFIGURE YOUR CLOCK BEFORE MOUNTING IT TO A WALL OR HOUSING. REFER TO THE SYNCHRONIZATION SYSTEM SETUP SECTION OF THIS MANUAL FOR INSTRUCTIONS.

  • Page 54: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock - Locally Powered Included in Package Description Quantity Picture Power/grounding wires And connector (not used) #8x1.5 Self-tapping screw...

  • Page 55: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock - Locally Powered 1) Install the double gang box in the wall or ceiling. 2) Run power wiring to the gang box.

  • Page 56: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock - Locally Powered 5) Remove the mounting plate and drill the four 6) Reattach the mounting plate, this time using all holes that were just traced.

  • Page 57: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock - Locally Powered 9 10 9) Release the mounting piece from the back of 10) Attach the clock housing to the pole using...

  • Page 58: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock - Locally Powered 12) Attach the base of the pole to the mounting plate, so that the lip is on the top of the base, and the holes for the screws are on the bottom of the base.

  • Page 59: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock - Locally Powered 14) First remove the gearbox pin, then attach 15) Loosen the strain relief by unscrewing the two the power connector to the port on the movement.

  • Page 60: Double Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round SlimLine/Aluminum Clock - Battery Powered VERY IMPORTANT: CONFIGURE YOUR CLOCK BEFORE MOUNTING IT TO A WALL OR HOUSING. REFER TO THE SYNCHRONIZATION SYSTEM SETUP SECTION OF THIS MANUAL FOR INSTRUCTIONS.

  • Page 61: Double Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round SlimLine/Aluminum Clock - Battery Powered Included in Mounting Kits (A-SLM-MK-S-1) or (A-SLM-MK-AW) Description Quantity Picture Mounting Piece...

  • Page 62: Double Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round SlimLine/Aluminum Clock - Battery Powered 1) Detach the mounting plate from the mounting 2) Place the mounting plate on the wall or ceiling.

  • Page 63: Double Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round SlimLine/Aluminum Clock - Battery Powered 5 5B 5) Insert the #8 screws through the mounting plate 5B) If you are installing the clock atop an gang box, and into the anchors.

  • Page 64: Double Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round SlimLine/Aluminum Clock - Battery Powered 7) Remove the back covers from the battery pack by pulling the two latches away to either side and sliding the cover out.

  • Page 65: Double Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com 10 11 Double Mount Installation - Round SlimLine/Aluminum Clock - Battery Powered 10) Slide each clock onto the adapter in the rotation 11) If you feel the need to detach the clock from the that you wish it to be viewed.

  • Page 66: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round SlimLine/Aluminum Clock - Locally Powered VERY IMPORTANT: CONFIGURE YOUR CLOCK BEFORE MOUNTING IT TO A WALL OR HOUSING. REFER TO THE SYNCHRONIZATION SYSTEM SETUP SECTION OF THIS MANUAL FOR INSTRUCTIONS.

  • Page 67: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round SlimLine/Aluminum Clock - Locally Powered Included in Mounting Kits (A-SLM-MK-S-1) or (A-SLM-MK-AW) Description Quantity Picture Mounting Piece...

  • Page 68: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round SlimLine/Aluminum Clock - Locally Powered 1) Install the double gang box in the wall or ceiling. 2) Run power wiring to the gang box.

  • Page 69: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round SlimLine/Aluminum Clock - Locally Powered 5) Remove the mounting plate and drill the four 6) Reattach the mounting plate, this time using all holes that were just traced.

  • Page 70: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round SlimLine/Aluminum Clock - Locally Powered 9) Attach the base of the pole to the mounting plate so that the lip is on the top of the base, and the holes for the screws are on the bottom of the base.

  • Page 71: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com 11 12 Double Mount Installation - Round SlimLine/Aluminum Clock - Locally Powered 11) First remove the gearbox pins, then attach a 12) Lay any excess wiring across the strain relief...

  • Page 72: Double Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock - Battery Powered VERY IMPORTANT: CONFIGURE YOUR CLOCK BEFORE MOUNTING IT TO A WALL OR HOUSING. REFER TO THE SYNCHRONIZATION SYSTEM SETUP SECTION OF THIS MANUAL FOR INSTRUCTIONS.

  • Page 73: Double Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock - Battery Powered Included in Wiring Kit (A-WK-MTG-1) Description Quantity Picture #10x1.5 Self-tapping screw Wall anchor...

  • Page 74: Double Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock - Battery Powered 1) Detach the mounting plate from the mounting 2) Place the mounting plate on the wall or ceiling.

  • Page 75: Double Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock - Battery Powered 5 5B 5) Insert the #8 screws through the mounting plate 5B) If you are installing the clock atop an gang box, and into the anchors.

  • Page 76: Double Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock - Battery Powered 8) Release the mounting piece from the back of 9) Attach both housings to the pole using four black...

  • Page 77: Double Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock - Battery Powered 11) Attach the base of the pole to the mounting plate, so that the lip is on the top of the base, and the holes for the screws are on the bottom of the base.

  • Page 78: Double Mount Installation

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com 14 15 Double Mount Installation - Square Clock - Battery Powered 14) Place the cover back onto the battery pack. You 15) Slide both clocks back into their housings. You should hear a snapping noise as the latches engage.

  • Page 79: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock - Locally Powered VERY IMPORTANT: CONFIGURE YOUR CLOCK BEFORE MOUNTING IT TO A WALL OR HOUSING. REFER TO THE SYNCHRONIZATION SYSTEM SETUP SECTION OF THIS MANUAL FOR INSTRUCTIONS.

  • Page 80: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock - Locally Powered Included in Wiring Kit (A-WK-12-1V) Description Quantity Picture Power/grounding wires And connector #8x1.5 Self-tapping screw...

  • Page 81: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock - Locally Powered 2) Run power wiring to the gang box. 1) Install the double gang box in the wall or ceiling.

  • Page 82: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock - Locally Powered 5) Remove the mounting plate and drill the four 6) Reattach the mounting plate, this time using all holes that were just traced.

  • Page 83: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock - Locally Powered 9 10 9) Release the mounting piece from the back of 10) Attach both housings to the pole using four...

  • Page 84: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock - Locally Powered 13) Attach the base of the pole to the mounting plate, so that the lip is on the top of the base, and the holes for the screws are on the bottom of the base.

  • Page 85: Locally Powered

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com 15 16 Double Mount Installation - Square Clock - Locally Powered 15) First remove the gearbox pins, then attach a 16) Loosen the strain relief by unscrewing the two power connector to the ports on the side of screws.
  • Page 86 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Connecting to the Clock Access to the clock can be controlled through the WIFI SW MECH SW WIFI SW button. Pressing the button a given number of times will perform the following actions.

  • Page 87: Task Bar Options

    Wi-Fi Monitor Software - Main Screen 1. Device List - Displays all of the Sapling IP devices that are active on the system subnet. The monitor screen displays the name of the clock, serial number, type of clock, IP address, last updated time, how long the clock has been running, the clock’s MAC address, and the status of the clock.

  • Page 88: Task Bar Options

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wi-Fi Monitor Software - Task Bar Options 1. Groups - When clicked, this button will open the Groups drop-down menu. All - Clicking on this option will cause the monitor to display all compatible IP devices on the network.

  • Page 89: Republic Road Huntingdon Valley, Pa

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wi-Fi Monitor Software - Task Bar Options 2. Filters - When clicked, this button will display the following options: Filter By Clock Type - By selecting this option, the user is able to view specific clock types on the Monitor Screen.
  • Page 90 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wi-Fi Monitor Software - Task Bar Options 3. Email Alerts - When clicked, this button will display the following options: Enable Missing Clock Email Alerts - By selecting this option, the user will receive an email alert if the Wi-Fi Monitor Software hasn’t heard from a selected group of clocks in a certain amount of time.
  • Page 91 5. Version - When clicked, this button will display version number information of the Wi-Fi Monitor Software and the Software Version Number (SVN). This information is needed only when contacting Sapling technical support and will not affect your usage of the Wi-Fi Monitor Software.
  • Page 92 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wi-Fi Monitor Software - Quick Access Menu Wi-Fi Monitor Soft- ware - Task Bar Op- tions Please note: These options can also be...

  • Page 93: Error Messages

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wi-Fi Monitor Software - Error messages 1. Characters are Red - When the characters of a clock have turned red, then the clock has not sent its status within the last 10 minutes.

  • Page 94: Web Interface

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Web Interface - Log In 1. Password - Location where the password is entered. The default password is 6063, but this can be changed within the settings.
  • Page 95 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Web Interface - Network Settings 1. Clock Name - This field allows the user to set a name used to identify the clock on the IP monitor. This name is also used to identify the clock in a network list while the clock is in Direct-Connect mode.
  • Page 96 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Web Interface - Network Settings (ctd.) 9. Gateway Address - This field allows the user to set the gateway IP address. If DHCP Auto On is enabled, this address will be assigned by the DHCP server.

  • Page 97: General Settings

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Web Interface - General Settings 1. Time Settings - Takes the user to the Time Settings page. 2. Daylight Saving Time - Takes the user to the Daylight Saving Time page.
  • Page 98 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Web Interface - Time Settings 1. Set Time - This setting allows the user to set the clock to a specific time. Fields for each portion of the time may be accessed via the drop-down menu.

  • Page 99: Daylight Saving Time

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Web Interface - Daylight Saving Time 1. Method for Defining DST - There are four methods for defining Daylight Saving Time. The method can be selected from the drop-down menu.

  • Page 100: Servers

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Web Interface - Servers 1. Server Addresses - These fields allow a user to set the address that the clock will use to obtain NTP time.
  • Page 101 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Web Interface - Login Settings 1. Viewer/Technician/Administrator Password - Allows the Administrator to set up a new password to the web interface.

  • Page 102: Diagnostics

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Web Interface - Diagnostics 1. Hardware Version - Lists the hardware versions of the clock. 2. Software Version - Lists the software version of the clock.

  • Page 103: Troubleshooting

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Web Interface - Troubleshooting 1. Check Hands - When clicked, this button causes the clock to test the position and accuracy of the hands as they travel around the clock.
  • Page 104 This does not upload the file, it only selects the file. 2. Update Webpages from File - Takes whichever file was selected with the Choose File button and applies the firmware file to the clock. Look for the latest firmware releases on our firmware page at https://sapling-inc.com...

  • Page 105: Frequently Asked Questions

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Frequently Asked Questions VERY IMPORTANT: CONFIGURE YOUR CLOCK BEFORE MOUNTING IT TO A WALL OR HOUSING. REFER TO THE SYNCHRONIZATION SYSTEM SETUP SECTION OF THIS MANUAL FOR INSTRUCTIONS.
  • Page 106 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Frequently Asked Questions (ctd.) How long does it take for a clock to receive correction data? On initial power up, the clock will open its receiver for ten minutes until the signal is acquired. If everything is installed and configured correctly, the clock should get NTP data and begin correcting itself within five seconds.

  • Page 107: Troubleshooting

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Troubleshooting VERY IMPORTANT: CONFIGURE YOUR CLOCK BEFORE MOUNTING IT TO A WALL OR HOUSING. REFER TO THE SYNCHRONIZATION SYSTEM SETUP SECTION OF THIS MANUAL FOR INSTRUCTIONS.

  • Page 108: Troubleshooting

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Troubleshooting I am uncertain if my clock is accessing my wireless network. How to I check this? Press and release the WIFI SW button once and observe the...
  • Page 109 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Troubleshooting Why isn’t the Wi-Fi clock showing up on my IP Monitor? Perform these steps in order until a step causes the clock to appear on the IP monitor: 1.
  • Page 110 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Diagnostic Test #1 - Signal Information The purpose of Diagnostic #1 is to determine how long it has been since the clock last received a synchronization signal.
  • Page 111 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Diagnostic Test #2 - Signal Quality The purpose of Diagnostic #2 is to check the voltage level of the batteries on a battery-powered clock.

  • Page 112: Restore Clock To Manufacturing Default

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Diagnostic Test #3 - Full Mechanical Test (ctd.) While performing Diagnostic #3, an observer may see the clock do the following actions: 1.
  • Page 113 Sapling Limited Warranty and Disclaimer The Sapling Company, Inc. warrants only that at the time of delivery and for a period of 24 calendar months after delivery or the period stated in this invoice, if different, the Goods shall be free of defects in workmanship and materials, PROVIDED that this warranty shall not apply: To damage caused by Buyer’s or any third party’s act, default or misuse of the Goods or by failure to follow...

  • Page 114: Fcc Statement

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com FCC Statements The Federal Communications Commission (FCC) wants you to know: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.

This manual is also suitable for:

Saw 5Saw 6Saw-4bs-12s-4Saw-5as-09r-1Saw-6ds-12r-2Saw-4bs-12r-4

Table of Contents