Sapling Prayer Clock Installation Manual page 19

Wi-Fi Network Clock Configuration
4. On the login page, use the default password 6063 and click on Submit to log into the clock.
5. Click on the Network Settings button.
6. The clocks/displays are already programmed by the manufacturer with their designated names to
reflect either the local time or prayer names. If a clock/display name is needed to be changed for a
specific application, use the "Clock Name" field to apply a name change.
7. In the Network field, enter the SSID of your preferred Wi-Fi network. This is the name that appears if
you try to connect to that Wi-Fi network on any other computer, tablet, or smart phone. If you do not
remember the name of your network, check to see if it has appeared in the Select Network list. A
network that does not broadcast its SSID will not appear in this list. SSIDs must use only English letters,
numbers, and spaces. No symbols.
8. Once all clocks (displays) have been programmed with the facility's Wi-Fi information, you can use the
Network Monitoring Software to view them all, as shown in the below image. Please make sure that
the Network Monitoring Software and the clocks (displays) are on the same Wi-Fi network.
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
19