Sapling Prayer Clock Installation Manual page 23

Table of Contents

Advertisement

Mandatory Network Configuration – for both IP Hard-Wired and Wi-Fi
Prayer times configuration:
While the 12" square clock is meant to display local time, the below digital displays are meant to display
prayer times, which will change daily based on the facility's location. For prayer times to calibrate daily, it
is mandatory to set the facility's physical location coordinates in each clock/display. Failing to do so, or if
wrong location coordinates are set, will cause wrong prayer times to be displayed.
Finding the facility's physical location coordinates can be done by using Google Maps. Type the facility's
physical address in Google Maps. Once the address (or the facility) has been identified on the map, right-
click on the red pin drop shown on the map and the first line will display the location's coordinates. The
first number represents the location's longitude (North or South), and the second number represents the
location's latitude (East and West). Eastern latitudes and Southern longitudes will have a minus symbol
before the number. The minus symbol must be entered in the clock perspective field to identify correct
location.
For example, image A below represents proper coordinates for the Empire State Building located in New
York, while image B represents proper coordinates for the Burj Khalifa tower in Dubai.
Image A
-73.98569
40.74886
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
USA
Image B
55.27437
25.19730
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
23

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Prayer Clock and is the answer not in the manual?

Table of Contents