Slave Mode; Dmx Channels; Channels - SHOWTEC Compact Par 36 CW Instructions Manual

6. Slave Mode

1) You can use the same functions on the master device as described on page 12 (Built-in Programs,
Color Temperature or Manual control). This means on the master device you can set your desired
operation Mode and all slave devices will react the same as the master device.
2) When the display shows
master.

DMX Channels

2 Channels

Channel 1 – Amber
0-255
Channel 2 – White
0-255
3 Channels
Channel 1 – Master Dimmer
0-255
Channel 2 – Amber
0-255
Channel 3 – White
0-255
7 Channels
Channel 1 – Master Dimmer
0-255
Channel 2 – Amber
0-255
Channel 3 – White
0-255
Channel 4 – Strobe
0-9
10-255
Channel 5 – Color Programs
0-51
52-101
102-152
153-203
204-254
255
: this device is a slave device. It will now react the same as its
Amber gradual color brightness from 0 to 100%
White gradual color brightness from 0 to 100%
Brightness from 0 to 100%
Amber gradual color brightness from 0 to 100%
White gradual color brightness from 0 to 100%
Brightness from 0 to 100%
Amber gradual color brightness from 0 to 100%
White gradual color brightness from 0 to 100%
No Function
Strobe effect, from slow to fast (0-20 flashes/sec.)
No Function
Program 1 (2-color, gradual change) A, AW, W
Program 2 (2-color, slow fade in, fast out)
Program 3 (2-color, slow fade out, fast in)
Program 4 (colortemperature gradual change) RG, GB, RB, RGB
Program 5 (fantasy change)
14