Sensitivity Mode; Dmx Mode; Slave Mode; Remote Mode - SHOWTEC gatactic RGB-600 value series User Manual

3. Sensitivity Mode

With this menu you can set the Audio Sensitivity.
1) Press the FUNC button, until the display shows
2) You can choose 10 different Audio Sensitivity levels.
Use the Up / Down buttons to select the required address from
is no audio activation.
3) Use the ENTER button to store your setting.

4. DMX Mode

With this menu you can set the DMX address.
1) Press the FUNC button, until the display shows
2) You can choose 496 different DMX addresses.
Use the Up / Down buttons to select the required address from
3) Use the ENTER button to store your setting.

5. Slave Mode

With this menu you are able to set the device as a slave device.
1) Press the FUNC button, until the display shows
2) Use the ENTER button to store your setting.

6. Remote Mode

With this menu you are able to activate the remote control modus.
1) Press the FUNC button, until the display shows
2) Use the ENTER button to store your setting.
3) In any standalone mode (excepted REM and SLA), press ON/OFF for 2 seconds to activate the
remote function.
4) Please see remote control menu for more info.

7. Pattern Mirror Reverse Mode

1) Press the FUNC button, until the display shows
2) Use the Up / Down buttons to scroll through the entire menu.
Normal mirror mode.
x-axis reverse.
y-axis reverse.
x-axis and y-axis reverse.
3) Use the ENTER button to store your setting.
is audio sensitivity, from low to highly sensitive.
.
.
.
.
.
15
.
.