Table of Contents
Advertisement
Cameleon Flood 6 Q6 Tour
Program 01
01) If you choose program 01, the display will show:
Touch the UP/DOWN buttons to choose one of the 2 options:
●
COLOR
●
STROBE
Touch the SET button to enter the desired menu.
If you chose COLOR, touch the UP/DOWN buttons to choose one of the 33 color macros. Touch the
SET button to save your settings.
If you chose STROBE, touch the UP/DOWN buttons to set the strobe frequency. The adjustment range
is between 0–99, from OFF to high frequency. Touch the SET button to save your settings.
Programs 02–16
01) If you choose one of the programs 02–16, the display will show:
02) Touch the UP/DOWN buttons to choose one of the 2 options:
●
SPEED
●
STROBE
03) Touch the SET button to enter the desired menu.
04) If you chose SPEED, touch the UP/DOWN buttons to set the built-in program's speed. The adjustment
range is 1–100, from slow to fast. Touch the SET button to save your settings.
05) If you chose STROBE, touch the UP/DOWN buttons to set the strobe frequency. The adjustment range
is 0–99, from OFF to high frequency. Touch the SET button to save your settings.
Master/Slave Mode
In this menu you can set the device as a slave.
01) While in the main menu, touch the UP/DOWN buttons to choose SLAVE.
02) Touch the SET button to enter the menu. The display will show:
03) Touch the UP/DOWN buttons to choose YES or NO.
04) Touch the SET button to confirm your choice.
05) If you have chosen YES, the device will be set as a slave and will react the same as the master
device.
Product code: 42683
25
Advertisement
Table of Contents
