Club Par 12-4 RGBW Table of contents Warning ....................................2 Safety Instructions ................................. 2 Operating Determinations ............................4 Rigging .................................... 4 Connection with the mains ............................5 Return Procedure ................................6 Claims ....................................6 Description of the device ..............................7 Frontside..................................
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: Showtec Club Par 12-4 RGBW IEC power cable (1,5 m) ...
Page 4
• If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
Club Par 12-4 RGBW • The user is responsible for correct positioning and operating of the Club Par 12-4 RGBW. The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device. • This device falls under protection class I. Therefore it is essential to connect the yellow/green conductor to earth.
Club Par 12-4 RGBW The Club Par 12-4 RGBW can be placed on a flat stage floor or mounted to any kind of truss with a clamp. Improper installation can cause serious injuries and/or damage of property! Connection with the mains Connect the device to the mains with the power-plug.
Club Par 12-4 RGBW Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.
Club Par 12-4 RGBW Description of the device Features The Club Par 12-4 RGBW is an compact light effect with high output and great effects. Ideal solution for small clubs and mobile DJs Compact size Sound Control Input voltage: 100-240V, 60/50Hz ...
Club Par 12-4 RGBW Backside Fig. 02 04) Built-in Microphone 05) Audio Sensitivity 06) 4-digit LED display + menu buttons 07) 3-pin DMX signal connector IN 08) 3-pin DMX signal connector 09) IEC power connector 100-240V + Fuse T2AL/250V Installation Remove all packing materials from the Club Par 12-4 RGBW.
Club Par 12-4 RGBW Control Modes There are 5 modes: • Built-in programs • Manual Mode • Static Color • Sound-controlled • DMX-512 (4CH or 9CH) One Club Par (Built-in programs, Static Color Mode and Manual Mode) 01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation. 02) Plug the end of the electric mains power cord into a proper electric power supply socket.
Club Par 12-4 RGBW Multiple Club Pars DMX Set Up Fig. 03 Note : Link all cables before connecting electric power Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support.
Club Par 12-4 RGBW The Club Par 12-4 RGBW can be operated with a controller in control mode or without the controller in stand-alone mode. Control Panel A) LED display MODE button C) SETUP button D) UP button DOWN button Fig.
Club Par 12-4 RGBW Main Menu Options DMX-512 Mode Channel Mode Program Speed Built-in programs Sound-controlled Mode Static Color Mode Strobe Green Blue White Mode Led On/Off Temperature Version Reset 1. DMX-512 Mode With this menu, you can set the DMX address and select the desired channel mode. 01) Press the MODE button until the display shows 02) Press the SETUP button to open the submenu, the display will show 03) Press the UP/DOWN buttons to choose the desired DMX address.
Club Par 12-4 RGBW 3. Speed 01) Press the MODE button until the display shows 02) Press the SETUP button to open the submenu, then press the UP/DOWN buttons to adjust the run speed of the built-in programs. The adjustment range is between , 00-99 (from fast to slow).
Club Par 12-4 RGBW 11. White With this menu, you can manually adjust the intensity of the white LEDs. 01) Press the MODE button until the display shows 02) Press the SETUP button to open the submenu, then press the UP/DOWN buttons to adjust the intensity of the white LEDs.
Club Par 12-4 RGBW 9 channels Channel 1 – Dimmer intensity 0-255 Gradual adjustment, from dark to brightest 0-100% Channel 2 – Red Dimmer must be open 0-255 Gradual adjustment Red, from 0-100% Channel 3 – Green Dimmer must be open 0-255 Gradual adjustment Green, from 0-100% Channel 4 –...
Suspect three potential problem areas as: the power supply, the LEDs, the fuse. 01) Power supply. Check that the unit is plugged into an appropriate power supply. 02) The LEDs. Return the Club Par to your Showtec dealer. 03) The fuse. Replace the fuse. See page 17 for replacing the fuse.
Club Par 12-4 RGBW No Response to DMX Suspect the DMX cable or connectors, a controller malfunction, a light effect DMX card malfunction. 01) Check the DMX setting. Make sure that DMX addresses are correct. 02) Check the DMX cable: Unplug the unit; change the DMX cable; then reconnect to electrical power. Try your DMX control again.