Dmx-512 Mode; Master/Slave Mode; Sound-Controlled Mode; Manual Mode (Static Color Mode) - SHOWTEC Power Spot 6 Q5 Manual

Power Spot 6 Q5

3. DMX-512 Mode

01) Press the MODE button until the display shows
02) Press the UP/DOWN buttons to choose the desired DMX address. There are 512 DMX addresses
available.
03) Press the SETUP button to open the submenu.
04) Press the UP/DOWN buttons to choose one of the 3 channel modes:

4. Master/Slave Mode

01) Press the MODE button until the display shows
02) The device is now operating in Master/Slave Mode. It means that it will react the same as the master
device.

5. Sound-controlled Mode

01) Press the MODE button until the display shows
02) Press the SETUP button to open the menu.
03) Press the UP/DOWN buttons to set the desired sound sensitivity. The adjustment range is between
04) Sound-controlled Mode is now active and the device will react to the beat of the background
music.

6. Manual Mode (Static Color Mode)

01) Press the MODE button until the display shows
02) Press the SETUP button to open the menu.
03) Repeatedly press the SETUP button to toggle between the following color settings:
04) Press the UP/DOWN buttons to adjust the intensity of each of the 5 color LEDs. The adjustment range
is between 0-255, from low to high intensity.
Ordercode: 42574
5-channel mode
7-channel mode
9-channel mode
, from low to high sound sensitivity.
Red
Green
Blue
White
Amber
.
.
.
.
15