Main Menu Options; Built-In Programs; Manual Mode - SHOWTEC Compact Par 36 CW Instructions Manual

Main Menu Options

1. DMX address
2. DMX Modes
3. Dim Mode
4. Pre-programmed Color Temperatures
5. Color Temperature Manual Mode

6. Built-in Programs

The Compact Par 36 will only show its version number at start-up !
1. Built-in Programs
1) Press the MODE button on the device, until the display shows
2) Now press ENTER to open this menu. With this menu you can set the Built-in Program Mode of the
Compact Par.
You can choose 5 built-in programs
3) You can choose 1 extra sub menu..

2. Manual Mode

1) Press the MODE button on the device, until the display shows
2) Use the UP/Down buttons to scroll through the menu.
You can select
3) Now press ENTER to open this menu, a small red dot will appear behind the first letter.
With these menus, you can manually set the intensity of Amber, White and the Strobe speed.
Use the ENTER button to scroll through the menu.
Use the UP/Down buttons to change the intensity of each color or to change the strobe speed.
When you have set your desired color, you can save it by pressing the ENTER button.
Program Running Speed from 00-100 (Slow to Fast).
, or
Amber, from 0 -100%
White, from 0 -100%
Strobe speed, from slow to fast (0 – 20 Flashes/sec.)
, by using the Up / Down buttons.
.
12
.
.