Energetic XL
DMX Mode / DMX Channels
In this menu you can enable DMX control mode and set the DMX starting address of the device.
Press the ENTER button to enable DMX control mode. The display shows the current DMX starting
address. If there is no DMX connection, the display is blinking.
Note:
If you exit DMX mode, the DMX connection will be discontinued and the device will not
react to the DMX controller.
Press the ENTER button to enable the DMX Mode.
The device will show its current DMX address.
Press the Enter button again to open the submenu.
Press the UP/DOWN buttons to select your desired DMX Mode. You can choose 2 or 9 channels.
Choose the desired configuration and press the Enter button to open the submenu.
Press the Up and Down buttons to set the desired DMX address.
If you choose the
If you choose the
Slave Mode
In this menu you can set the device as a slave device in master/slave control mode.
Press the ENTER button to set the device as a slave device.
System Settings
With this menu you can set several system functions.
Product code: 43169
configuration, the adjustment range is between
configuration, the adjustment range is between
27
.
.