Built-In And Custom Programs; Master/Slave Mode; Dmx-Address - SHOWTEC Performer Profile 600 Q4 Manual

Performer Profile 600 Q4

2. Built-in and custom programs

With this menu you can set the built-in programs or choose your edited custom programs.
01) While in main menu, press the
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 10 uneditable built-in programs (AT01-AT10) and
10 editable presets (PR.C1-PR.10) which can be edited in Edit mode (see page 24).
04) The device will now run the desired built-in program or edited custom program.

3. Master/Slave Mode

With this menu, you can set the device as a slave.
01) While in main menu, press the
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the 2 following options:
DMX/Master Mode
Slave Mode
04) When the display shows
05) When the display shows
same as the master device.

4. DMX-address

With this menu you can set the desired DMX address.
01) While in main menu, press the
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose the desired DMX address. There are 512 available DMX
addresses to choose from
Ordercode: 33061
UP/DOWN buttons until the display shows
UP/DOWN buttons until the display shows
, the device is operating in DMX/Master Mode.
, the device is operating in Slave Mode. It means that it will react the
UP/DOWN buttons until the display shows
.
23
.
.
.