Static Color Mode; Color Jump Mode; Color Dream Mode; Auto Run Program - SHOWTEC led par 56 short pro rgb User Manual

2. Static Color Mode

1) Press the MODE button on the device, until the display shows
2) With these menus you can set the Static Color Mode of the LED Par 56 Short Pro.
There are 7 different Static Colors.
Blackout
Red
Green
Blue
Purple
Yellow
Cyan
White
Use the UP/Down buttons to change the color.

3. Color Jump Mode

1) Press the MODE button on the device, until the display shows
2) With this menus you can set the Color Jump Mode of the LED Par 56 Short Pro.
Use the Up/Down buttons to adjust the Color Jump Speed from

4. Color Dream Mode

1) Press the MODE button on the device, until the display shows
2) With this menus you can set the Color Dream Mode of the LED Par 56 Short Pro.
Use the Up/Down buttons to adjust the Color Jump Speed from

5. Auto Run Program

1) Press the MODE button on the device, until the display shows
2) With this menu you can set the Auto Mode of the LED Magic Flower.

6. Sound control Mode

1) Press the MODE button on the device, until the display shows
Turn on the music and the LED Par 56 Short Pro will react to the beat of the music.
2) Press the Up/Down buttons to adjust the sound sensitivity level from S1.00 - S1.31.
00 being the least sensitive and 31 being the most sensitive.

7. Slave Mode

You can use the same functions on the master device as described on page
This means, you can set your desired operation Mode on the master device and all slave devices will
react the same as the master device.
12
.
.
.
.
.
.
.
12.