Kia EV9 2024 Manual page 85

Safety features of your Kia
- Pelvic: The cushion part moves to
help the pelvis move left and right.
- Lumbar: The lumbar support
moves and helps exercise the back
and front of the waist.
- Whole Body: The cushion and lum -
bar support move sequentially to
help the whole body exercise to
relieve fatigue.
- Off: Disable the comfort stretching
function.
僅 Comfort Stretching can be turned off
by pressing the switch for approxi -
mately 1 second or longer during
comfort stretching operation.
僅 During the operation of the Comfort
Stretching function, press any of the
seat adjustment switches (cushion
support, lumbar support, bolster
adjustment device), so the operation
stops.
僅 Select Setup → Vehicle → Seat →
Ergo-Motion Seat → Comfortable
Stretch from the infotainment system
to change the intensity and duration
of the comfort stretching feature.
- Intensity: Normal/Strong
- Duration: Short (10 min.), Normal
(15 min.), Long (20 min.)
Posture assist
After about an hour of driving with the
driver's seat belt fastened, the posture
assist function automatically turns on
and assists the driver's posture by
adjusting the driver's seat's hips and
waist parts.
Operation
僅 Select Setup → Vehicle → Seat →
Ergo-Motion Seat → Smart Posture
Assist from the infotainment system.
僅 If you press the seat adjustment
switch (cushion support, lumbar sup -
port, bolster adjustment device) while
the posture assist function is operat -
ing, the operation stops.
Operating condition(s)
If both conditions below are satisfied,
the posture assist function automatically
operates to assist the driver's posture.
僅 The vehicle is in ON position
僅 The driver's side seatbelt is fastened
Lumbar Stabilization System
while driving
This function repeats the adjustment of
the lumbar support in a regular pattern
to reduce back fatigue when driving
continuously for a long time.
Operation
僅 Select Setup → Vehicle → Seat →
Ergo-Motion Seat → Use Lumbar
Stabilization System while Driving
(Off, 30 min, 1hour) from the info -
tainment system.
僅 If you press the lumbar support
adjustment switch while the lumber
support function is operating while
driving, the operation stops.
Operating condition(s)
Activates automatically after 30 min -
utes or 1 hour of continuous driving.
Seat
4
4 17