Kia EV9 2024 Manual page 223

Features of your vehicle
Auto reverse user settings
If you don't have enough visibility with
the angles as the factory default condi -
tions, you can readjust and store the
angles of outside rear view mirrors.
The factory default angles of the right
and left rear view mirrors might be set
differently to improve visibility.
1. Set the shifter dial to P (Park). Make
sure that the vehicle is stopped and
the mirrors are not working.
2. Position the lever to L (left) or R (right)
depending on the mirror that you
want to adjust.
3. Step on the brake pedal and shift the
shifter dial to R (Reverse).
4. When the downward movement of
the rearview mirror is finished, adjust
the mirror to the desired angle by
pressing the switches, ▼, ▲, ◀, ▶.
5. If you shift the dial to a position other
than R (Reverse), or change the rear -
view mirror selector lever to the neu -
tral position and the automatic return
of the mirror is finished, the adjusted
angle will be automatically saved.
How to reset auto reverse user
settings
If you want to change the automatic
control function of rearview mirrors to
the factory default conditions, follow the
steps below:
1. Shift the shifter dial to P (Park). Make
sure that the vehicle is stopped and
the mirrors are not working.
2. Choose the mirror to be adjusted by
positioning the lever to L (left) or R
(right).
3. Step on the brake pedal and shift the
dial to R (Reverse).
4. When the downward movement of
the rearview mirror is finished, press
the switch ▲ to locate the mirror in
the position higher than before (P, N
or D).
(Adjust the mirror in the higher posi -
tion compared to its position in the
driving mode)
5. It is initialized when the dial is shifted
to a position other than R (Reverse) or
the rearview mirror selector lever is
changed to the neutral position. (Ini -
tialized position will be applied from
the next operation)
CAUTION
We recommend following the proce -
dures in an orderly manner to change or
initialize the auto reversing user settings.
If you move to the next step before com -
pleting the previous one, the changed
angle may not be changed or initializa -
tion may not work properly.
Mirrors
5
5 85