Table of Contents
Advertisement
Driver assistance guide
Changing set speed
OMV053225CF
OMV053226CF
If the speed limit of the road changes
during the operation of Manual Speed
Limit Assist or Smart Cruise Control, an
arrow in the direction of up or down is
displayed to inform the driver that the
set speed needs to be changed. At this
time, the driver can change the set
speed according to the speed limit by
using the (+) or (–) switch on the steer -
ing wheel.
Auto set speed change
OMV053187CF
When operating Manual Speed Limit
Assist or Smart Cruise Control, if the
speed set by the driver is the same as
the speed limit on the road, the set
speed is automatically adjusted accord -
ingly the speed limit afterwards. The
auto set speed change function operates
on roads with a speed limit of above 70
km/h (45 mph). When the function is
activated, the set speed on the instru -
ment cluster is displayed in green.
7
50
Intelligent Speed Limit Assist (ISLA)
WARNING
僅 When driving at a speed lower than
the speed limit, set the offset under
'0', or press (-) switch to decrease
your set speed.
僅 Even after changing the set speed
according to the speed limit of the
road, the vehicle can still be driven
over the speed limit. If necessary,
depress the brake pedal to reduce
your driving speed.
僅 If the speed limit of the road is under
30 km/h (20 mph), the set speed
change and auto set speed change
function will not work.
僅 Intelligent Speed Limit Assist oper -
ates using the speed unit in the instru -
ment cluster set by the driver. If the
speed unit is set to a unit other than
the speed unit used in your country,
Intelligent Speed Limit Assist may not
operate properly. (Except Australia/
Russia)
NOTICE
僅 For more details on Manual Speed
Limit Assist operation, refer to "Man -
ual Speed Limit Assist (MSLA)" on
page 7-46.
僅 For more details on Smart Cruise Con -
trol operation, refer to "Smart Cruise
Control (SCC)" on page 7-59.
Advertisement
Chapters
Table of Contents
