Kia EV9 2024 Manual page 212

Features of your vehicle
4) Canadian Programming
Canadian radio-frequency laws require
transmitter remote signals to "time-out"
(or quit) after a couple seconds of trans -
mission, which may not be long enough
for HomeLink to pick up the signal
during programming.
If you live in Canada or you are having
difficulties programming a gate operator
or garage door opener by using the pro -
gramming procedures, replace "Pro -
gramming a New HomeLink Button"
step 3 with the following:
While the HomeLink indicator light (7) is
flashing orange, press and release
("cycle") your device's hand-held remote
every two seconds until the HomeLink
indicator light (7) changes from orange
to green. You may now release the
hand-held remote button. Then proceed
with "Programming a New HomeLink
Button" step 4.
2. Operating HomeLink씾
1) Operating HomeLink씾
1. Press and release the desired pro -
grammed HomeLink button (1, 2 or 3).
OMV033473N
NOTICE
The HomeLink indicator (7) should light
green, solid or flashing, and your pro -
grammed device should operate.
If your device does not operate, the
HomeLink programming was not suc -
cessful Reprogram the button.
5 74
2) Two-Way Communication Dis -
play Behavior
1. Press and release one of the pro -
grammed HomeLink buttons (1, 2 or
3)
OMV033475N
2. The indicator (4) and (6) operates as
below (if your garage door opener has
Two-Way Communication functional -
ity).
OMV033476N
僅 If the indicator (4) flashes Orange, it
indicates that the garage door is
"Closing".
僅 The indicator (4) turns solid Green
once the garage door has closed.
僅 If the indicator (6) flashes Orange, it
indicates that the garage door is
"Opening".
僅 The indicator (6) turns solid Green
once the garage door has fully
opened.
僅 If the indicator (4) or (6) does not
turn Green, it indicates that the last
status of garage door was not
received properly. The HomeLink
mirror tries to receive the last
known status of the garage door
for a few seconds.
Mirrors