Kia EV9 2024 Manual page 520

Driver assistance guide
Smart Exit operation status
Operation
status
The turn signal of the exit direction blinks
Under
until the exit is complete or Smart Exit is
control
canceled.
How to turn off Smart function
while operating
僅 Press the Parking/View ( ) button in
the following stage:
- Checking space
- Select exit direction
僅 Shift the gear to R (Reverse) in the fol -
lowing stage:
- Checking space
- Select exit direction
僅 Press the Parking Safety ( ) button
or select Cancel on the infotainment
system screen to turn off Exit func -
tion.
僅 While Smart Exit function is operating,
if the vehicle is stopped by depressing
the brake pedal, and the gear is
shifted, Exiting function will turn off.
At this time, EPB (Electronic Parking
Brake) will not be engaged.
The function will pause in the fol -
lowing conditions when:
When Exit function is paused, the vehicle
will stop. If the condition that made the
function to pause disappears, the func -
tion may operate again.
僅 There is a pedestrian, animal or object
in the direction the vehicle is moving
僅 The door or liftgate is open
僅 The driver's seat belt is not fastened
僅 Blind-Spot Collision-Avoidance Assist
or Rear-Cross Traffic Collision Assist
7 150
Turn signal
Remote Smart Parking Assist 2 (RSPA 2)
operates while the vehicle is being
controlled in the reverse direction
僅 The Parking/View ( ) button is not
continuously pressed
僅 The vehicle is stopped by depressing
the brake pedal
The function will cancel in the fol -
lowing conditions when:
When Smart Exit function is canceled,
the vehicle will automatically stop, shift
the gear to P (Park) and engage EPB
(Electronic Parking Brake).
僅 Smart Exit
- The steering wheel is steered
- The gear is shifted while the vehicle
is moving
- Operating EPB while the vehicle is
moving
- The hood is open
- The driver opens the door with the
seatbelt unfastened
- Rapid acceleration occurs
- Vehicle skid occurs
- The wheel is stuck by an obstacle
and cannot move
- There are pedestrians, animals or
objects at the front and rear of the
vehicle at the same time
- Approximately 3 minutes and 50
seconds have past after Smart Exit
function has started to operate
- The slope of the road exceeds the
operational range
- The function was paused for more
than 1 minute
- The steering wheel, gearshift, brak -
ing, and drive controls are not
working normally
- ABS, TCS or ESC system operates
due to slippery road conditions