Kia EV9 2024 Manual page 542

What to do in an emergency
3. Unscrew the valve cap of the dam -
aged tire and screw the sealant bottle
filling hose onto the tire valve.
OMV063008
4. Make sure the compressor is turned
off.
5. Connect the battery connector and
cable to the 12V battery in the follow -
ing order.
OMV063029
僅 Red cable: Connect to battery (+)
terminal.
僅 Black cable: Connect to battery (-)
terminal
6. Start the vehicle, turn on the compres -
sor, and run it for approximately 5-7
minutes before injecting the sealant.
7. Inject the sealant to ensure recom -
mended tire air pressure. Check and
adjust the tire pressures later. For the
recommended air pressure, Refer to
the "Tires and Wheels" section on
page 8-3.
8. Turn off the compressor and discon -
nect the sealant bottle's injection hose
from the tire.
9. After using it, keep the TMK assem -
bled with the injection hose in the
sealant bottle side and the injection
hose in the compressor side assem -
bly.
8 16
If you have a flat tire (with Tire Mobility Kit)
CAUTION
僅 Securely install the sealant filling hose
on the valve. If not, sealant may flow
backward, possibly clogging the filling
hose.
WARNING
If the tire pressure is below
29psi(200kPa), do not drive the vehicle.
It may cause accident.
Return the TMK to its storage location in
the vehicle.
WARNING
Carbon monoxide
Do not leave your vehicle running in a
poorly ventilated area for extended peri -
ods of time. Carbon monoxide poisoning
and suffocation can occur.