Kia EV9 2024 Manual page 82

Safety features of your Kia
Non-operating condition(s)
僅 When the vehicle is in R (Reverse)/N
(Neutral)/D (Drive) position
僅 When the vehicle speed is above 3
km/h (2 mph)
僅 When the driver position memory sys -
tem needs initialization
Resetting relaxion comfort seat
Driver's side
OMV023031_2
1. Open the driver's side door when the
vehicle is stopped and the vehicle in
ON position.
2. Move the seat forward as far as possi -
ble, and raise the seatback angle as
forward as possible by using the
driver's seat forward/backward
adjustment switch and seatback angle
adjustment switch.
3. Press the Driver 1 switch (1) from the
driver position memory system and
push the front portion of the driver's
seat forward/backward adjustment
switch (the direction to move the seat
position forward) at the same time for
approximately 2 seconds.
CAUTION
Make sure there are no obstacles
around the driver's seat before initializa -
tion.
4 14
The initialization process are as fol -
lows.
1. With a beep sound, the initialization
process begins.
2. The seat and backrest automatically
move to the rear. A beep sounds con -
tinuously during operation.
3. The seat and backrest will move to
the center again and the initialization
process will end with the last beep
sound.
Non-operating condition(s)
The initialization process will be inter -
rupted in the following situations.
僅 When any problem occurs in the
driver position memory system
僅 When the driver position memory sys -
tem button is pressed
僅 When the driver's side seat adjust -
ment switch is pressed
僅 When the vehicle speed is above 3
km/h (2 mph)
僅 When the driver's side door is closed
NOTICE
僅 If the driver's seat operation and a
beep sound stop during initialization,
start initialization again.
僅 After initialization, adjust the seat to
suit the driver and save it to the driv -
ing position memory system again.
Seat