Kia EV9 2024 Manual page 17

Electric vehicle guide
screen. If it is higher than the cur -
rent amounts of high voltage bat -
tery, the light (B) does not turn on.
僅 Check whether the light of V2L con -
nector or indoor power outlet turns
on or not.
僅 If the warning message for V2L
appears on the cluster, refer to
"LCD display messages" on page 1-
11.
僅 If V2L does not operate properly
when connecting other electronic
appliances, visit an authorized Kia
dealer.
5. Press the switch (A) to turn off the
light (B). You can disconnect the V2L
connector when the light (B) turns off
and the charging door lock is deacti -
vated pressing the door unlock button
on the smart key.
V2L power outlet (if equipped)
1. Connect to the power outlet located at
bottom of the rear seat with the EV
button in the ON position.
2. Slide the V2L power outlet cover to
the left.
OMVQ013017
3. Check the operation status at the
front indicator of the power outlet.
OMVQ013067
僅 Blue: Standby
僅 Red: No power supply even though
the power outlet is connected
僅 Green: The power outlet is con -
nected correctly to provide power
LCD display messages
V2L has ended. Battery level has
reached the set value
OMVQ013041N
1 V2L has ended. Battery level has
reached the set value
When the high voltage battery level
reaches the discharging limit set level,
the V2L will stop and the warning will be
displayed. If you want to use the V2L
continuously, make the discharging limit
set level lower than the present battery
level.
V2L stopped due to excessive
power use
OMVQ013042N
1 V2L stopped due to excessive
power use
If you use an electrical appliance that
exceeds the maximum power output the
vehicle can supply, it will stop working
EV menu
1
1 11