Driver assistance guide
Remote Operation
Operating order
Remote Operation operates in the fol -
lowing order:
1. Getting ready to remotely move for -
ward and backward
2. Remotely moving forward and back -
ward
1. Getting ready to remotely
move forward and backward
There are two ways to operate Remote
Operation function.
Method (1): Using the function
with vehicle off
OMV053080_2
1. Within a certain range from the vehi -
cle press the door lock ( ) button on
the smart key and lock all doors.
2. Press and hold the Remote Start but -
ton ( ) within 4 seconds until the
vehicle starts.
* For more details on remotely starting
the vehicle, refer to "Smart key" on
page 5-8.
Method (2): Using the function
with vehicle on
OMV053081_2
7
136
Remote Smart Parking Assist 2 (RSPA 2)
OMV053165N
1 Remote Parking Instructions
2 1. Leave vehicle (keep the smart
key). Close all doors.
3 2. Press and hold the Forward or
Backward button on the smart key.
1. Park the vehicle in front of the space
where you want to use Remote Oper -
ation function, and shift the gear to P
(Park).
2. Press and hold the Parking/View ( )
button to turn on Smart Parking
Assist. A message Under REMOTE
control will appear on the infotain -
ment system screen.
3. Get out of the vehicle with the smart
key and close all doors.
NOTICE
僅 Agree must be selected on the info -
tainment system screen and the info -
tainment system has to operate
properly to use Remote Operation
function.
僅 Method (2) can be used after the vehi -
cle has been driven above 5 km/h (3
mph).
僅 If the function is turned on again after
parallel parking is completed by
Remote Smart Parking Assist, Remote
Operation function can be used with
Method (2).