Kia EV9 2024 Manual page 584

Hide thumbs Also See for EV9 2024:
Table of Contents

Advertisement

Maintenance
3. Check the removed fuse; replace it if
it is blown. To remove or insert the
fuse, use the tool in the fuse panel
cover.
4. Push in a new fuse of the same rating,
and make sure it fits tightly in the
clips. If it fits loosely, consult an autho -
rized Kia dealer.
Replacing main/multi fuses
OMV073016
OMV073017
Operation
1. Turn off the vehicle.
2. Remove the fuse panel cover by
pressing the tab and pulling the cover
up.
3. Disconnect the battery (-) cable.
4. Remove the nuts shown in the picture
above.
5. Replace the fuse with a new one of
the same rating.
6. Reinstall in the reverse order of
removal.
7. If it fits loosely, consult an authorized
Kia dealer.
9
34
Replacing relay
OMV073018
1. Turn the vehicle and all other switches
off.
2. Remove the fuse panel cover by
pressing the tab and pulling the cover
up.
3. Replace the relay with a new one of
the same rating.
4. Reinstall in the reverse order of
removal.
5. If it fits loosely, consult an authorized
Kia dealer.
CAUTION
僅 After checking the fuse panel in the
motor compartment, securely install
the fuse panel cover with clicking
sound. If not, electrical failures may
occur from water contact.
僅 Visually inspect the battery cap for
secure latching. If the battery cap is
not securely latched, the electrical
system may be damaged from water
contact.
NOTICE
僅 The electronic system may not func -
tion correctly even when the motor
compartment and internal fuse box's
individual fuses are connected. May
be a disconnect of the main fuse (BFT
type), which is located inside the posi -
tive battery terminal (+) cap. Since the
main fuse is more complex than other
fuses, visit an authorized Kia dealer.
Fuses

Advertisement

Table of Contents
loading

Table of Contents