If Your Isp Uses Pppoe - Watchguard Firebox X15 User Manual

3
Type the IP address, subnet mask, default gateway, primary
DNS, secondary DNS, and DNS domain suffix into the related
fields. Get this information from your ISP or corporate network
administrator.
If you completed the table on page 15, type the information from the
table.
4 Click Submit.

If your ISP uses PPPoE

If your ISP uses PPPoE, you must enter the PPPoE information into
your Firebox before it can send traffic through the external inter-
face. For more information in PPPoE, see "About PPPoE" on page 5.
To set your Firebox to use PPPoE on the external interface:
1
Use your browser to connect to the System Status page. From
the navigation bar, select Network > External.
The External Network Configuration page appears.
User Guide
Configuring the External Network
63