Configuring The Firebox For Muvpn Clients Using A Pocket Pc; Distributing The Software And The .Wgx File - Watchguard Firebox X15 User Manual

Configuring the MUVPN Client
Configuring the Firebox for MUVPN clients using a
Pocket PC
To create a MUVPN tunnel between the Firebox X Edge and your
Pocket PC, you must configure the Firebox User account differently.
Follow the previous procedure, but select Pocket PC from the VPN
Client Type drop-down list.
WatchGuard does not distribute a MUVPN software package for
Pocket PCs. You must examine the software manufacturer's
instructions to configure their software and the Pocket PC. For
more information about configuring your Pocket PC as an MUVPN
client, see "Tips for Configuring the Pocket PC" on page 214.

Distributing the Software and the .wgx File

You must give the remote user the MUVPN software installer and
the end-user profile, or .wgx file.
Get the MUVPN installation files from the
WatchGuard
You must log in to the LiveSecurity® Service at http://www.watch-
guard.com/support to download the software. After you log in, go to
the Latest Software area and select Firebox® X Edge in the Choose
Product Family area. There are two different versions of Mobile User
VPN software. One version contains the ZoneAlarm® personal fire-
wall and the other one does not.
Get the user's .wgx file
The Firebox X Edge has encrypted MUVPN client configuration
(.wgx) files available for download.
- To connect to the System Status page, type https:// in the
browser address bar, and the IP address of the Edge trusted
interface.
The default URL is: https://192.168.111.1
- From the navigation bar, select Firebox Users.
- Below MUVPN Client Configuration Files, select the .wgx file
to download by clicking on the link username.wgx where
username is the Firebox user's name.
- At the prompt, save the .wgx file to your computer.
196
N
OTE
Web site
®
WatchGuard Firebox X Edge