Watchguard Firebox X15 User Manual page 141

WatchGuard System Manager User Guide. Use these instructions to send your
event logs to the Log Server.
1
To connect to the System Status page, type https:// in the browser
address bar, and the IP address of the Edge trusted interface.
The default URL is: https://192.168.111.1
2
From the navigation bar, click Logging > WatchGuard Logging.
The WatchGuard Logging page appears.
3
Select the Enable WatchGuard Logging check box.
4 In the Device Name field, type a name for the Firebox X Edge.
This name lets the Log Server know which log messages come from which device.
The Device Name appears in the Log Viewer. If this field is clear, the Firebox X Edge
is identified in the log by the IP address of the Firebox external interface.
5
Below Primary Log Host, type the IP address of the primary Log Server in
the Log Host IP Address field.
6
Type a passphrase in the Log Encryption Key field and confirm the
passphrase in the Confirm Key field.
The same passphrase must also be used when the Log Server is configured to
receive log messages from this Firebox X Edge.
User Guide
Log to a WatchGuard Log Server
127