Watchguard Firebox X15 User Manual page 157

3
Below Local User Accounts, click Add.
The New User page appears. It shows the Settings tab.
4
In the Account Name field, type a name for the account. The
user types this name when authenticating.
The account name is case-sensitive.
5
In the Full Name field, type the first and last name of the user.
This is for your information only. A user does not use this name during
authentication.
6
In the Description field, type a description for the user.
This is for your information only. A user does not use this description
during authentication.
7 In the Password field, type a password with a minimum of eight
characters.
Mix eight letters, numbers, and symbols. Do not use a word you can find
in a dictionary. For increased security use a minimum of one special
symbol, a number, and a mixture of uppercase and lowercase letters.
8
Type the password again in the Confirm Password field.
9
In the Administrative Access drop-down list, set the level to
which your user can see and change the Edge configuration
properties: None, Read-Only, or Full.
User Guide
Using Local Firebox Authentication
143