Configuring the MUVPN Client
The wireless MUVPN client cannot connect to the Internet, the
computers on the optional network, or any other network that
the Edge has a connection to.
All networks
This is the usual configuration for wireless MUVPN clients. The
wireless MUVPN client can connect to:
- The trusted network
- The optional network
- Networks behind static routes
- Networks on the other side of a Branch Office VPN
- The external network (usually the Internet)
You can configure some Firebox users to connect only to the trusted
network, and other Firebox users to connect to all networks:
1
To allow a Firebox user to only connect to the trusted network,
clear or do not select the check box All traffic uses tunnel
(0.0.0.0/0 IP Subnet) in the Firebox user's MUVPN setup.
2
To allow a Firebox user to connect to all networks through the
VPN tunnel, select the check box All traffic uses tunnel
(0.0.0.0/0 IP Subnet) in the Firebox user's MUVPN setup.
To make wireless computers authenticate as MUVPN clients:
1
To connect to the System Status page, type https:// in the
browser address bar, and the IP address of the Edge trusted
interface.
The default URL is: https://192.168.111.1.
2
From the navigation bar, select Network > Wireless.
3
Select the check box Require encrypted MUVPN connections
for wireless clients.
4
Click Submit.
Tips for Configuring the Pocket PC
WatchGuard does not supply a Mobile User VPN software package
for the Pocket PC platform. You must use the software manufac-
turer's instructions to configure their software and the Pocket PC.
The Firebox® X Edge only allows connections that use IPSec. The
Edge does not support PPTP VPN tunnels.
214
WatchGuard Firebox X Edge