Watchguard Firebox X15 User Manual page 61

2
From the navigation bar, select Administration > WSM Access.
The WatchGuard System Manager Access page appears.
3
Select the Enable remote management check box.
4
From the Management Type drop-down list, select WatchGuard
Management System.
5
To put the Firebox X Edge into the control of WatchGuard
System Manager centralized Edge management, click the Use
Centralized Management check box.
When the Firebox X Edge is under centralized management, access to
the Firebox X Edge configuration pages is set to read-only. The only
exception is access to the WSM Access configuration page. If you disable
the remote management feature, you get read-write access to the
Firebox X Edge configuration again.
Do not select the Use Centralized Management check box if you are
using WatchGuard System Manager only to manage VPN tunnels.
6
Type a status passphrase for your Firebox X Edge and then type
it again to confirm in the correct fields.
7
Type a configuration passphrase for your Firebox X Edge and
then type it again to confirm in the correct fields.
User Guide
Setting up WatchGuard System Manager Access
47