Installing And Configuring The Muvpn Client; Installing The Muvpn Client - Watchguard Firebox X15 User Manual

Configuring the MUVPN Client
The DNS server on the private network of the Firebox X Edge must
be the first server in the list.
7
Select the Append these DNS suffixes (in order) radio button.
8
Below the radio button, click Add
The TCP/IP Domain Suffix window appears.
9
Enter the domain suffix for your network's private domain in
the related field and click Add.
To add more DNS suffixes, repeat steps 8 and 9.
10 Click the WINS tab.
11 From the section WINS addresses, in order of use, click Add.
The TCP/IP WINS Server window appears.
12 Type the IP address of the WINS server in the related field and
click Add.
To add more WINS servers, repeat steps 11 and 12.
13 Click OK to close the Advanced TCP/IP Settings window. Click
OK to close the Internet Protocol (TCP/IP) Properties window.
14 Click OK to close the connection window.

Installing and Configuring the MUVPN Client

To install and configure the MUVPN client, you must have local
administrator rights on the remote computer.

Installing the MUVPN client

To install the MUVPN client:
1
No other IPSec VPN client software can be active on the remote
computer. Remove any other IPSec VPN software from the user's
computer before installing the WatchGuard® MUVPN software.
2
Copy the MUVPN installation program and the .wgx file to the
remote computer.
3 Double-click the MUVPN installation file to start the
InstallShield wizard.
204
N
OTE
.
N
OTE
WatchGuard Firebox X Edge